Uploaded October 2026 | Updated November 2026, 13 hours ago
I tested the new NVIDIA VFX nodes in ComfyUI to upscale my MiniMax H3 video on my [GPU name] with [X] GB of VRAM. Here are the best settings I found, plus how to get 48 fps and HDR.
The NVIDIA upscale took about 10 seconds. SeedVR2 took 3 to 4 minutes on the same video.
BEST SETTINGS (from my tests)
1. Generate the video with MiniMax H3
2. Latent Upscaler 3D (I used 1344 × 768). Do not skip this step.
3. RTX Video Super Resolution: STREAMING_ULTRA, scale 2
4. A second RTX Video Super Resolution node: DEBLUR_ULTRA
5. RTX Video Frame Generation: multiplier 2
6. Create Video: frame rate 48
7. Optional: RTX TrueHDR with HDR (HLG) or HDR PQ. Both looked good to me.
WHAT I FOUND
- The latent upscaler and the NVIDIA node do different jobs. In my test, the NVIDIA node did not replace the latent upscaler.
- ULTRA (the default) and BICUBIC looked almost the same.
- STREAMING_ULTRA gave the best result of the NVIDIA modes, even though NVIDIA made it for live streams and webcam video.
- Each node can use only one quality mode. To upscale and sharpen, you need two nodes.
- DENOISE and DEBLUR clean the video but do not make it bigger. On my video, DEBLUR_ULTRA helped and DENOISE_ULTRA showed no change.
- SeedVR2 still looks more natural, especially in the eyes, because it keeps a little noise. The NVIDIA nodes are much faster.
TWO MISTAKES TO AVOID
- 48 fps: the multiplier only adds frames. You also need to set Create Video to 48. If you leave it at 24, the video becomes twice as long and the audio ends halfway.
- HDR: ComfyUI does not save HDR information inside the video file. Export it as HDR (HLG or PQ) in your video editor before you upload. People with a normal screen will see a normal version.
LOW VRAM TIP
If you get an out-of-memory error, lower the scale, use a lower quality mode, or send fewer frames at once. Speed also depends on your graphics card.
REQUIREMENTS
- NVIDIA RTX graphics card (Frame Generation needs an RTX 40 series card or newer)
- PyTorch for CUDA 13 or newer
- Install from ComfyUI Manager: search for "ComfyUI Nvidia VFX Nodes" (the old name was Nvidia RTX Nodes)
Workflow: patreon.com/ComfyuiWorkflowBlog/posts/minimax-h3-for-172802597
ComfyUI Nvidia VFX Nodes: github.com/Comfy-Org/ComfyUI_Nvidia_VFX_Nodes
Which one do you use for your AI videos, SeedVR2 or the NVIDIA nodes? Tell me in the comments.
#MiniMaxH3 #ComfyUI #AIVideo
I tested the new NVIDIA VFX nodes in ComfyUI to upscale my MiniMax H3 video on my [GPU name] with [X] GB of VRAM. Here are the best settings I found, plus how to get 48 fps and HDR.
The NVIDIA upscale took about 10 seconds. SeedVR2 took 3 to 4 minutes on the same video.
BEST SETTINGS (from my tests)
1. Generate the video with MiniMax H3
2. Latent Upscaler 3D (I used 1344 × 768). Do not skip this step.
3. RTX Video Super Resolution: STREAMING_ULTRA, scale 2
4. A second RTX Video Super Resolution node: DEBLUR_ULTRA
5. RTX Video Frame Generation: multiplier 2
6. Create Video: frame rate 48
7. Optional: RTX TrueHDR with HDR (HLG) or HDR PQ. Both looked good to me.
WHAT I FOUND
- The latent upscaler and the NVIDIA node do different jobs. In my test, the NVIDIA node did not replace the latent upscaler.
- ULTRA (the default) and BICUBIC looked almost the same.
- STREAMING_ULTRA gave the best result of the NVIDIA modes, even though NVIDIA made it for live streams and webcam video.
- Each node can use only one quality mode. To upscale and sharpen, you need two nodes.
- DENOISE and DEBLUR clean the video but do not make it bigger. On my video, DEBLUR_ULTRA helped and DENOISE_ULTRA showed no change.
- SeedVR2 still looks more natural, especially in the eyes, because it keeps a little noise. The NVIDIA nodes are much faster.
TWO MISTAKES TO AVOID
- 48 fps: the multiplier only adds frames. You also need to set Create Video to 48. If you leave it at 24, the video becomes twice as long and the audio ends halfway.
- HDR: ComfyUI does not save HDR information inside the video file. Export it as HDR (HLG or PQ) in your video editor before you upload. People with a normal screen will see a normal version.
LOW VRAM TIP
If you get an out-of-memory error, lower the scale, use a lower quality mode, or send fewer frames at once. Speed also depends on your graphics card.
REQUIREMENTS
- NVIDIA RTX graphics card (Frame Generation needs an RTX 40 series card or newer)
- PyTorch for CUDA 13 or newer
- Install from ComfyUI Manager: search for "ComfyUI Nvidia VFX Nodes" (the old name was Nvidia RTX Nodes)
Workflow: patreon.com/ComfyuiWorkflowBlog/posts/minimax-h3-for-172802597
ComfyUI Nvidia VFX Nodes: github.com/Comfy-Org/ComfyUI_Nvidia_VFX_Nodes
Which one do you use for your AI videos, SeedVR2 or the NVIDIA nodes? Tell me in the comments.
#MiniMaxH3 #ComfyUI #AIVideo










