Uploaded February 2019 | Updated September 2026, 2 weeks ago
This is a 0.96" (yes it's that tiny) spectrum analyzer that has several displays and a variable resistor on the back to dial in the correct screen fill per your input strength. It's mono, so you would use either the right or left sides of the input. No plugs, you'll have to solder on some 22 ga. wires to make connections.
I'm trying to include a schematic I made up for the thumbnail because they don't publish one on the product page.
This is a 0.96" (yes it's that tiny) spectrum analyzer that has several displays and a variable resistor on the back to dial in the correct screen fill per your input strength. It's mono, so you would use either the right or left sides of the input. No plugs, you'll have to solder on some 22 ga. wires to make connections.
I'm trying to include a schematic I made up for the thumbnail because they don't publish one on the product page.
