Uploaded July 2022 | Updated November 2026, 2 days ago
Tutorial is out. youtu.be/tH5wH1BgWdU
Updated version. Built in survival. Recorded in creative. 21 blocks high for better rates. Also easier to fix when a flying machine gets stuck due to random ticks of leaves during flight.
I'm using a modification of Blazing King two way machine. It's chunk border proof. youtu.be/1b83ZzlpC5s
Easy build. Find a large flat area. Start your build at least six blocks off the ground to account for the vertical machines being 5 blocks tall. Lay out a stick piston facing upwards, and put a dirt block on top. That's your center. On your X or Z axis, place upward facing pistons out 9 blocks in each direction. This is the top of your vertical machines. Have the first pistons be level with the dirt. Then honey/slime block, then another piston on the other side. Place an upwards facing piston on top of honey/slime. First machines laid out. Keep going piston-honey-piston pattern so you have three flying machines to each side. This forms half your spawn floor. On the other axis lay out solid blocks for nine blocks in each direction, one Y level above dirt block. Then build your horizontal machines 7 times to a total height of 21 blocks at the end of one of the nine block layout.
After that its just red stone wiring, pistons for launching and returns, and whatever you want done with the logs. I used cube makers, but I imagine wither cages could work.
Always let the vertical machines return before launching horizontal. Random leaf decay WILL occasionally stop a flying machine. Use scaffolding to get to the observers of the machine. Flint and steel will start it. The machines won't ever break, but you have to kick start it. Again always have vertical machines sent first and return before horizontal. The center two vertical machines will hit the horizontal and then you have a mess to fix mid air.
Tutorial is out. youtu.be/tH5wH1BgWdU
Updated version. Built in survival. Recorded in creative. 21 blocks high for better rates. Also easier to fix when a flying machine gets stuck due to random ticks of leaves during flight.
I'm using a modification of Blazing King two way machine. It's chunk border proof. youtu.be/1b83ZzlpC5s
Easy build. Find a large flat area. Start your build at least six blocks off the ground to account for the vertical machines being 5 blocks tall. Lay out a stick piston facing upwards, and put a dirt block on top. That's your center. On your X or Z axis, place upward facing pistons out 9 blocks in each direction. This is the top of your vertical machines. Have the first pistons be level with the dirt. Then honey/slime block, then another piston on the other side. Place an upwards facing piston on top of honey/slime. First machines laid out. Keep going piston-honey-piston pattern so you have three flying machines to each side. This forms half your spawn floor. On the other axis lay out solid blocks for nine blocks in each direction, one Y level above dirt block. Then build your horizontal machines 7 times to a total height of 21 blocks at the end of one of the nine block layout.
After that its just red stone wiring, pistons for launching and returns, and whatever you want done with the logs. I used cube makers, but I imagine wither cages could work.
Always let the vertical machines return before launching horizontal. Random leaf decay WILL occasionally stop a flying machine. Use scaffolding to get to the observers of the machine. Flint and steel will start it. The machines won't ever break, but you have to kick start it. Again always have vertical machines sent first and return before horizontal. The center two vertical machines will hit the horizontal and then you have a mess to fix mid air.










