Milling your own PCB at home with a CNC Router! @BrainybitsCanada

Milling your own PCB at home with a CNC Router! @BrainybitsCanada

Uploaded April 2018 | Updated September 2026, 1 week ago

Finaly found some time to play around with the X-Carve to mill PCB's. Here are the results! Step by step and more detailled tutorial videos are coming soon!

EasyEda tutorial:
youtu.be/wTsHi65_uyc

PCB Clamp by chemist4higher: thingiverse.com/thing:1767750

CNC bits used:
stores.ebay.ca/CARBIDE-PLUS?_trksid=p2047675.l2563

Get more information about this and other tutorials on my website:
brainy-bits.com
Facebook: facebook.com/brainybits
Twitter: twitter.com/Brainy_Bits

Milling your own PCB at home with a CNC Router!

Use the Arduino Leonardo as a Mouse with an Analog Joystick module - Tutorial

Arduino How To? - The 1st step: Install and configure the ARDUINO IDE Software

Potentiometer Values? Does it matter in your next Arduino Project?

Lets make a Dart Game Scoreboard - Final Part 3 - The Keypad Code - Tutorial

Arduino Libraries! How to Install them properly! Tutorial showing you 3 different ways

Lets make a Dart Game Scoreboard - Part 2 - Tutorial

One code to rule them All! Combine two Arduino code into one - Tutorial

How to connect and use an Analog Joystick with an Arduino - Tutorial

Installing Drivers and Programming the DigiSpark ATtiny85 dev boards - Tutorial

The Door Lock Control Panel! Making Movie Props using an Arduino - Final Part

Finally! A BIG OLED Display for the Arduino!

Milling your own PCB at home with a CNC Router!