Uploaded May 2022 | Updated November 2026, 2 hours ago
Video goes over Seasonal Maintenance by preparing the Misting system for Winter storage and first use for the Summer season.
Winterization helps the systems from freezing over and prevents ice build up while in storage. Signs of freeze / ice build up in a system are: Cracks and Leaks around the Fittings, possible tubing blow outs.
Dewinterization, preps the systems by removing debris from storage and air locks.
Chapters:
00:00 Winterization
02:50 Dewinterization
-----
Definitions
PSI: Pounds per Square Inch
GPM: Gallons Per Minute
Air Lock: Air bubbles in the system. The air bubbles prevent water from flowing, including locks sensors from opening.
-----
Common Replacement Parts for the 200 PSI Mist:
✔️ Tube Release Tool: bit.ly/3LZAre8
✔️ 1/4in Push Lock and 3/8in Stem (Outlet): bit.ly/3LVaoVw
✔️ 3/8in Push Lock and 3/8in Stem (Inlet): bit.ly/3M6DmSE
✔️ 0.012 Stainless Steel Nozzle: bit.ly/38hBFCT
✔️ End Plug: bit.ly/3Forzwl
✔️ Filter (Calcium Inhibitor - Poly Phosphate): bit.ly/3vZV58I
✔️ 1/4in Clamps: bit.ly/3yobBRi
✔️ 3/8in Feed Line with Tubing and Garden Hose Adapter (6ft): bit.ly/3MT6psK
Plastic Kit
✔️ Plastic Tee: bit.ly/3spMolD
✔️ Black 1/4in Tubing by the Foot: bit.ly/3vXU15a
✔️ Black 1/4in Tubing 50ft: bit.ly/398bJtq
Metal Kit
✔️ Metal Tee: bit.ly/3kWRCkG
✔️ Beige 1/4in Tubing by the Foot: bit.ly/3vXl8gv
✔️ Beige 1/4in Tubing 50ft: bit.ly/38gUAOm
We're also on Amazon:
amzn.to/3PcQp6H
Mid Pressure Not Enough Mist? Check our Website for more Kits with Higher Pressure and additional Applications!
mistcooling.com
Need Help?
👷 Common FAQs: bit.ly/3G0iEBD
📘 Manual: bit.ly/3KWxgCD
📨 Email: Support@MistCooling.com
🔨 Custom Design: bit.ly/3kOyFAH
.
Video goes over Seasonal Maintenance by preparing the Misting system for Winter storage and first use for the Summer season.
Winterization helps the systems from freezing over and prevents ice build up while in storage. Signs of freeze / ice build up in a system are: Cracks and Leaks around the Fittings, possible tubing blow outs.
Dewinterization, preps the systems by removing debris from storage and air locks.
Chapters:
00:00 Winterization
02:50 Dewinterization
-----
Definitions
PSI: Pounds per Square Inch
GPM: Gallons Per Minute
Air Lock: Air bubbles in the system. The air bubbles prevent water from flowing, including locks sensors from opening.
-----
Common Replacement Parts for the 200 PSI Mist:
✔️ Tube Release Tool: bit.ly/3LZAre8
✔️ 1/4in Push Lock and 3/8in Stem (Outlet): bit.ly/3LVaoVw
✔️ 3/8in Push Lock and 3/8in Stem (Inlet): bit.ly/3M6DmSE
✔️ 0.012 Stainless Steel Nozzle: bit.ly/38hBFCT
✔️ End Plug: bit.ly/3Forzwl
✔️ Filter (Calcium Inhibitor - Poly Phosphate): bit.ly/3vZV58I
✔️ 1/4in Clamps: bit.ly/3yobBRi
✔️ 3/8in Feed Line with Tubing and Garden Hose Adapter (6ft): bit.ly/3MT6psK
Plastic Kit
✔️ Plastic Tee: bit.ly/3spMolD
✔️ Black 1/4in Tubing by the Foot: bit.ly/3vXU15a
✔️ Black 1/4in Tubing 50ft: bit.ly/398bJtq
Metal Kit
✔️ Metal Tee: bit.ly/3kWRCkG
✔️ Beige 1/4in Tubing by the Foot: bit.ly/3vXl8gv
✔️ Beige 1/4in Tubing 50ft: bit.ly/38gUAOm
We're also on Amazon:
amzn.to/3PcQp6H
Mid Pressure Not Enough Mist? Check our Website for more Kits with Higher Pressure and additional Applications!
mistcooling.com
Need Help?
👷 Common FAQs: bit.ly/3G0iEBD
📘 Manual: bit.ly/3KWxgCD
📨 Email: Support@MistCooling.com
🔨 Custom Design: bit.ly/3kOyFAH
.


![How to replace pressure switch on Mistcooling Pump | Mistcooling.com
Learn how to replace a faulty pressure switch on your Mistcooling high-pressure misting pump with this step-by-step tutorial. This video guides you through the entire maintenance process, including:
https://www.mistcooling.com/shop/mc60520-mistcooling-pump-pressure-switch-misting-pump-parts-1913
Preparation: Turning off the water supply and unplugging the pump for safety. [00:10]
Accessing the Unit: Removing the side panel screws and loosening the exterior nut to access the internal components. [00:20]
Removal: Disconnecting the electrical wires and using wrenches to safely remove the old pressure switch. [00:55]
Installation: Preparing the new switch with Teflon tape and ensuring the dial is set correctly before installation. [01:53]
Reassembly: Reconnecting wires and tightening all fittings to prevent water leaks. [02:36]
Ensure your misting system stays in peak condition by performing regular maintenance. You can purchase replacement pressure switches directly from mistcooling.com.
#Mistcooling #MistingPump #DIYRepair #PressureSwitch #Maintenance #OutdoorCooling #HighPressurePump #MistingSystem How to replace pressure switch on Mistcooling Pump | Mistcooling.com](https://i.ytimg.com/vi/LFSdt6bh-xY/mqdefault.jpg)





![How to change Seal Kit - 2. Changing seal kit on 1500 PSI Misting Pump - 0.15 & 0.30 GPM
In [Part 2] of our 1500 PSI seal replacement series, we move on to removing the pump head. Learn the Criss-Cross screw removal technique that is vital to prevent warping the pump head and ensuring a leak-free seal later on.
Next Step (Part 3): [ youtube.com/watch?v=rgr1dM2Kxag&list=PL3P-t0hkHNi45cO_Sl4gnwGuerEgSfHl3&index=3&pp=iAQB ]
Get the Release Tool: [ https://www.mistcooling.com/shop/mc55050-tube-release-tool-quick-easy-push-to-connect-fitting-removal-2995 ]
Shop 1500 PSI Seal Kits: [ https://www.mistcooling.com/shop/mc60560-seal-kit-for-oil-less-mist-pumps-misting-pump-parts-accessories-1863 ]
#MistCooling #MistingSystem #DIYMaintenance #Part2 #1500PSI How to change Seal Kit - 2. Changing seal kit on 1500 PSI Misting Pump - 0.15 & 0.30 GPM](https://i.ytimg.com/vi/MevK2HRtfss/mqdefault.jpg)

