Uploaded July 2019 | Updated November 2026, 1 hour ago
In this episode, we will be will be follow up the MicroMill / GRBL adaptation using the Sain Smart GRBL board (see more here: amzn.to/2EBVHGq ) as so far this board has been working great and on top of it, it is very affordable! You can also find out more about the project as well as all the pieces you need to make your own MicroMill here: diy3dtech.com/micromill-resource-page
Also if you looking for a crazy affordable 5 Axis (yes you read that correctly) CNC, then check these out: diy3dtech.com/affordable-5-axis-3040-cnc
One of the handiest tools as a maker I have is the CO2 laser as they are VERY affordable, check these out for yourself: diy3dtech.com/purchase-laser
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
instagram.com/diy3dtech to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
In this episode, we will be will be follow up the MicroMill / GRBL adaptation using the Sain Smart GRBL board (see more here: amzn.to/2EBVHGq ) as so far this board has been working great and on top of it, it is very affordable! You can also find out more about the project as well as all the pieces you need to make your own MicroMill here: diy3dtech.com/micromill-resource-page
Also if you looking for a crazy affordable 5 Axis (yes you read that correctly) CNC, then check these out: diy3dtech.com/affordable-5-axis-3040-cnc
One of the handiest tools as a maker I have is the CO2 laser as they are VERY affordable, check these out for yourself: diy3dtech.com/purchase-laser
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: diy3dtech.com/blog
Please visit DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
instagram.com/diy3dtech to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
![Design Talk - Winston Moy Inspired Maker Knife Sheath!
In this episode, we where inspired by a video from Winston Moy desktop CNC maker extraordinaire who in a recent video created a new face as well as belt holder for his Giaco Whatever Maker Knife. Now this got me thinking as several time I have failed to lock the blade and poked myself in the leg when the blade would pop-out unexpectedly. So got thinking why shouldnt Team Additive take a shot and design a an interlocking sheath which we did!
On the why we also tried new print ordinations because as you guys know this is something I have been experimenting with and was surprised with what we could achieve!
Thingiverse Link: https://www.thingiverse.com/thing:4223406
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Design Talk - Winston Moy Inspired Maker Knife Sheath!](https://i.ytimg.com/vi/jOSAgWYzCvg/mqdefault.jpg)
![Fusion 360 Minute - Fusion 360 Slicer and Post Processors!
In this episode, we will be demystify the world of the Post Processor in the Fusion 360 slicer! What is it for and what it does are all questions we will tackle together so lets jump into it!
If you want more Fusion 360 Minute, check out our Fusion 360 playlist here: http://diy3dtech.com/fusion_360_minute
Looking for a more cost effective alternative to the space mouse (see more here: http://diy3dtech.com/space_mouse_pro ) for Fusion 360? Well the Contour Shuttle Express (see more here: http://diy3dtech.com/ShuttleXpress ) or the Contour Shuttle Pro (see more here: http://diy3dtech.com/ShuttlePro ) is the answer! As being able to work two handed with Fusion 360 will greatly enhance your productivity! You can also find more about the setup here: https://youtu.be/EFmFUDkuDJ4
Here is an earlier video regarding writing a post processor for a laser cutter: https://youtu.be/oKdjooqGxAo
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Fusion 360 Minute - Fusion 360 Slicer and Post Processors!](https://i.ytimg.com/vi/jd-0iVsB9Js/mqdefault.jpg)

![Shop Talk - 3D Printed Storage Shelves!
In this episode, we will be looking at some pretty serious 3D printed shelving which we designed to hold a dozen of our Harbor Freight storage boxes!
Brackets on Thingiverse: https://www.thingiverse.com/thing:4539054
Pressure Fit Endcaps.....: https://openscad.diy3dtech.com/openscad-designing-a-pressure-fit-endcap/
Compresion Fit Endcaps: https://openscad.diy3dtech.com/openscad-designing-a-compression-cover/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Shop Talk - 3D Printed Storage Shelves!](https://i.ytimg.com/vi/jtsJ67uxk-k/mqdefault.jpg)


![Ender 3 Modifications - Direct Drive Cable Management Plate!
We purchased a number of Ender 3s to refresh our 3D printing farms and we converted them to direct drive extruders for several reason (we used this kit which has worked very well: https://amzn.to/2PBesyF ) however it left an open hole in the gantry where the extruder use to be so we took advantage of this to design a simple but effective cable management system for the printer and wanted to share it with you guys!
Note: This mounts by either using two (2) or four (4) M3 bolts/Nuts which you can get here
https://amzn.to/3fBpuQ6
Thingiverse Link: https://www.thingiverse.com/thing:4564570
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Ender 3 Modifications - Direct Drive Cable Management Plate!](https://i.ytimg.com/vi/lCWkA_McYdU/mqdefault.jpg)
![Design Talk - 3D Printed Motion Control Design Jig!
In this episode, we will be looking at a 3D Printed stand we create for motion control prototyping. While a simple concept, it is based on 20x40 Extrusion (see more here: https://amzn.to/2QjtQRm ) and assists us in speeding up development of various designs. You can get the STL files on Thingiverse at the link below:
Thingiverse Link: https://www.thingiverse.com/thing:4082026
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/ to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech #RadioTech #Open-SCAD.DIY3DTech Design Talk - 3D Printed Motion Control Design Jig!](https://i.ytimg.com/vi/lJia1yZHciw/mqdefault.jpg)
![Design Talk - Unique Time Lapse Camera Mount for 3D Printing!
In this episode, we will be checking out a new camera mounting design I came up with for my larger format printers such as the CR-10 (see more here: http://diy3dtech.com/crealitycr103dprinter ) or the affordable AlfaWise U20 (see more here: http://diy3dtech.com/AlfawiseU20 ) as this attaches to the corner of the bed to offer uniquely styled views!
Thingiverse Link: https://www.thingiverse.com/thing:3548437
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Follow us on Instagram:
https://www.instagram.com/diy3dtech/ to what we are up too as we always have something cooking in the shop!
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com Design Talk - Unique Time Lapse Camera Mount for 3D Printing!](https://i.ytimg.com/vi/lrr8VoUNcog/mqdefault.jpg)
![Design Talk - Two Pieces Are Better Then One!
In this episode, we will be looking at the design Technics we used to create a new 4 inch (see more here: https://amzn.to/2vHCXUf ) vent hose adapter for the 1 HP fun house blower (see more here: https://amzn.to/36Rwin7 ) we use to evacuate fumes from the eBay/k40 CO2 Laser (see more here: http://diy3dtech.com/purchase-laser/ ) we use in the shop. Also this is the filament we used http://diy3dtech.com/pla to print this inlet duct.
Thingiverse Files: https://www.thingiverse.com/thing:4142081
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech Design Talk - Two Pieces Are Better Then One!](https://i.ytimg.com/vi/mAuEnWLK9dw/mqdefault.jpg)
![eBay K40 CO2 Laser - Gantry Alignment Frustrations Part 1!
In this episode, part 1 of two we will be looking at the potential alignment issues typically found in common eBay / k40 40 watt CO2 laser as this can be a major source of both confusion and frustration for new users as these are far from having any form of quality control in their manufacture so we are going to share what the most common alignment issues are!
Looking to by a CO2 laser? Find the best prices here: https://diy3dtech.com/purchase-laser/
Want to see what we are up to daily? Check out our regular YouTube Blog posts at: http://diy3dtech.com/blog
Please visit http://www.DIY3DTech.com for more information on this and many other projects!
Check us out on Social Media to see what we are up too as we always have something cooking in the shop!
-Follow us on Instagram:
https://www.instagram.com/diy3dtech/
-Follow us on Tumblr:
https://www.tumblr.com/blog/diy3dtech
-Follow us on Reddit:
https://www.reddit.com/user/DIY3Dtech
Subscribe to the DIY3DTech YouTube Channel:
http://YouTube.DIY3DTech.com
Subscribe to the DIY3DTech OpenSCAD Channel:
http://openscad-youtube.diy3dtech.com
If your looking for looking 3D Printer, Laser Cutter and CNC Swag (T-Shirts, Hats, Mugs, etc), please support the channel by visiting our online shop at: http://swag.DIY3DTech.com
Are you a retailer or product manufacture and would like your product reviewed? Please contact us at info[at]diy3dtech.com
Tags: #DIY3Dtech eBay K40 CO2 Laser - Gantry Alignment Frustrations Part 1!](https://i.ytimg.com/vi/mGQvHKnOa_c/mqdefault.jpg)