Uploaded September 2025 | Updated November 2026, 3 hours ago
00:00:01:10 - 00:00:32:05
Today we're going to show you how to install the straps to your Micro Pro. In case you didn't know, the straps used on the Mini and Mini Pro are the same straps used for the Micro Pro. Okay, let's do this. Start by aligning the strap to your platform and bring both buckles all the way in closer to the Lagree logo.
00:00:32:07 - 00:00:38:19
Then find the opening at the bottom on each side of the platform.
00:00:38:21 - 00:00:46:20
Insert one end of the strap into the side opening of the platform. Then bring the strap back up.
00:00:46:22 - 00:01:19:20
Fold the webbing loop against the wider webbing strap to insert the strap through the first side of the buckle. Go to the other side of the strap and repeat the same exact process.
00:01:19:22 - 00:01:27:13
Now that both sides are aligned. Pull both ends of the straps at the same time to tighten.
00:01:27:15 - 00:01:40:06
This should give you a firm centered strap already, but let's secure it. Tighten as needed.
00:01:40:08 - 00:02:13:13
Now that you've inserted the webbing on the first opening of both buckles, continue to insert the webbing on the second opening of each buckle to fully secure the strap to your platform.
00:02:13:15 - 00:02:24:02
To install the straps to your carriage and back platform. The process is exactly the same.
00:02:24:04 - 00:02:26:14
And that's it. Your strap is ready to go.
00:00:01:10 - 00:00:32:05
Today we're going to show you how to install the straps to your Micro Pro. In case you didn't know, the straps used on the Mini and Mini Pro are the same straps used for the Micro Pro. Okay, let's do this. Start by aligning the strap to your platform and bring both buckles all the way in closer to the Lagree logo.
00:00:32:07 - 00:00:38:19
Then find the opening at the bottom on each side of the platform.
00:00:38:21 - 00:00:46:20
Insert one end of the strap into the side opening of the platform. Then bring the strap back up.
00:00:46:22 - 00:01:19:20
Fold the webbing loop against the wider webbing strap to insert the strap through the first side of the buckle. Go to the other side of the strap and repeat the same exact process.
00:01:19:22 - 00:01:27:13
Now that both sides are aligned. Pull both ends of the straps at the same time to tighten.
00:01:27:15 - 00:01:40:06
This should give you a firm centered strap already, but let's secure it. Tighten as needed.
00:01:40:08 - 00:02:13:13
Now that you've inserted the webbing on the first opening of both buckles, continue to insert the webbing on the second opening of each buckle to fully secure the strap to your platform.
00:02:13:15 - 00:02:24:02
To install the straps to your carriage and back platform. The process is exactly the same.
00:02:24:04 - 00:02:26:14
And that's it. Your strap is ready to go.










