Michaels 2016 Minimoog Reissue Repairs/Mods (by synthpro) @synthpro
Michaels 2016 Minimoog Reissue Repairs/Mods (by synthpro)  @synthpro
Uploaded November 2023 | Updated November 2026, 4 days ago
Hey Guys,
In this video I take you along the adventure of making repairs to a 2016 Minimoog Reissue that was having troubles. Found an assortment of little issues as well as did some things to help the tone just a bit.

Here is technical info that may be helpful:

For those needing replacement power supply, the Mean Well Part # is P25A14E. (Note: plug will have to be modified with a female XLR 4 pin)
Pinout of XLR 4 pin:
Pin 1= -15V
Pin 2= +15V
Pin 3= Ground
Pin4= +5V
This Mean Well supply is already discontinued but as long as you get a supply with these current specs, it can be modified to work:
+5V= 2.5A
+15V= 500mA
-15V= 300mA

Screws for the interface boards, Power supply, and keyboard circuit board: #4-40 1/4"
These are the screws without lock washers so I recommend installing some or using some medium strength thread lock.

Thanks for watching!

Sincerely,
Jareth
Michaels 2016 Minimoog Reissue Repairs/Mods (by synthpro)Jasons 1973 Minimoog RestorationRoland Jupiter 6 Demo/ SOLD (by synthpro)How A Tonewheel Generator Works (by synthpro)Herb Deutschs Moog SOB Part 2 (by Synthpro)Programming Prophet 5 Patch Into Memorymoog (by synthpro)The 23rd Memorymoog Produced Gets Restored!!Jerrys Memorymoog Restore (by synthpro)Hammond synchronous Clock Repair (by synthpro)The Moog 1130 Percussion Controller Getting Some Repairs.Synthpro Is Closing On Fridays For ThisVintage Nutone Doorbell Repair/Mods (by synthpro)
synthpro |

Michael's 2016 Minimoog Reissue Repairs/Mods (by synthpro)

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER