Uploaded September 2023 | Updated November 2026, 3 hours ago
Hey Guys,
This is a video going over Michaels polymoog 203a I have restored. I disassembled this unit and stated from the ground up going through all areas upgrading and replacing common failure components. I found one crimp that was bad from factory for the square wave frequency drive buss on note A sharp 4, (seen in photos).
This polymoog also got my custom Vox Humana program change for preset 7 Vibes. I have also expanded my Vox Humana upgrade to include some changes to the VCF programming
The music at the beginning is a track I did years ago using my polymoog. full track here: youtu.be/AFTeWlZVOBE?si=K_JrSnb4ujGgSPTH
Thanks for watching!
Sincerely,
Jareth
Hey Guys,
This is a video going over Michaels polymoog 203a I have restored. I disassembled this unit and stated from the ground up going through all areas upgrading and replacing common failure components. I found one crimp that was bad from factory for the square wave frequency drive buss on note A sharp 4, (seen in photos).
This polymoog also got my custom Vox Humana program change for preset 7 Vibes. I have also expanded my Vox Humana upgrade to include some changes to the VCF programming
The music at the beginning is a track I did years ago using my polymoog. full track here: youtu.be/AFTeWlZVOBE?si=K_JrSnb4ujGgSPTH
Thanks for watching!
Sincerely,
Jareth








