Mercedes M102 engine removed. space for the V8 turbo @JMSpeedshop
Mercedes M102 engine removed. space for the V8 turbo  @JMSpeedshop
Uploaded September 2021 | Updated November 2026, 3 hours ago
➤Don't forget to subscribe ! bit.ly/SubscribeJMSpeedshop
➤Website: jmspeedshop.com
➤instagram: instagram.com/johanmuter

M102 engine removed. space for the V8 turbo.

It is time to start on the actual body for the v8 turbo S124.  The M102 engine and transmission is removed.  Also some other parts.   First the front bumper is removed. This not really needed but makes a little more room.  The front stabilizer bar is removed. It is very close to the oil sumpe so better to remove it.

When you start on the fuel lines and electronic wiring to remove.  Start always with removing the battery of the car. To be sure there is not a spark or any power source in the car anymore 

There is n the transmission there is a connector for the Return gear, and a big connector.  also throttle cable and speedo cable. On the engine the fuel line pressure line and return line is disconnected. The the wiring needs to be removed. This is connected to all sensors. Also the ignition system is disconnected from the wheel arch and removed with the engine.  

On the back of the engine there is a coolant line to the interior heater to be removed .  Then on the front some coolant hoses.  Don't forget the alternator cable.   

This car has and automatic transmission so there are cooling lines to the radiator from the transmission it will drain some oil.  also the steering pump pressure and return line needs to be disconnected. To have a better view i removed the filter housing. total 3 nuts.  

Weight of the M102 engine and 722.4 transmission is around 242kg  This is incl . engine oil and 95% of the transmission fluid and a little coolant not drain from the engine 

The weight of the M113 turbo engine and 722.6 transmission is arround 255 KG.  without and fluid in the engine known.

Weight of the M113 engine without turbo system and transmission in  oem conditoon with all bolt on parts is around 187kg

My expectation is that the engine fluids need to for the m113 and transmission is around 20kg in differnce weight to the m102.  So this is then about 33kg above the m102 setup.  when looking to the bigger cooler and and extra seperate oil coolers and intercooler.  i expect to get around 50kg of extra weight .  

Before i started the project i weight the full car at 1460kg  with 700kg front axle and 760kg rear axle with 25% fuel in the tank.  this will bring the car to 750kg on the front axle and with a full fuel tank around 800kf on the rear axle and get to a 1550 kg total what is pretty good i think..

if there are any questions about this subject let me know 

also see the complete playlist under projects
Mercedes M102 engine removed. space for the V8 turboM113 engine rebuild - Part 10 - V8 Turbo. NEW RODS & HEAD STUDS + Project goals !!Stanced !!! Volvo V70R 2.5 300HP Review & TestdriveThe REAL Rare !!!! Audi A1 Quattro 1 of 333 Review & TestDriveLIMITED !!! BMW Alpina B3 edition 30 1995 Review & TestDrive JMSpeedshop !BC Coilovers under a Mercedes  W201 190 V12 ! JMSpeedshop !Its alive !!! M113 turbo Start Up !! & oil pressure issue !!!Mercedes E63 AMG W212  Sedan & combi the last big V8!!!V12 190 W201 Project update ! Strut bar done, New intakes  manifolds.Benelli 900 Sei ?  custom bike.  sounds fantasticBMW 760 LI  V12 E66  Review & Testdrive JMSpeedshop.comYour first AMG !!! Mercedes C55 AMG Review & Testdrive JMSpeedshop !
JMSpeedshop ! |

Mercedes M102 engine removed. space for the V8 turbo

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER