Uploaded August 2019 | Updated November 2026, 2 hours ago
The video ends abruptly when the phone rings - sorry! Be sure to watch part two, come right after this in the upload queue.
What you'll need: one 12x12 sheet of medium weight chipboard, or any other medium weight card you can find. I made a 12" long box, I use the 12" square chipboard. You can make the box any length depending on what you have an how many memorydex cards you have. Cut your length accordingly. For mine I cut as follows:
1 - 4" x12" sheet (base)
2 - 2" x12" pieces (sides)
1 - 3 7/8" x 2" piece
1 - 3 7/8" x 5" piece
1 - 4" x 2" piece
1 - 4" x 5" piece
2 - 1-1 1/2" pieces
For patterned paper, you'll need (covering the box inside and out)
1 4x12 sheet (bottom base)
1 3 7/8 x 11 3/4 (inside bottom)
2 5x12 sheets (sides)
1 5x5 (lower end)
1 5x7 (higher end)
You will also need two wooden dowels, the length of your box and the same size as your hole punch.
Tools needed: trimmer/cutter to cut chipboard and paper
double sided tape for structure strips
scrap card stock for structure strips
ruler
glue
scissors
Cropadlie or other heavy duty paper punch
I think that's it. Contact me if you have any questions or problems.
The video ends abruptly when the phone rings - sorry! Be sure to watch part two, come right after this in the upload queue.
What you'll need: one 12x12 sheet of medium weight chipboard, or any other medium weight card you can find. I made a 12" long box, I use the 12" square chipboard. You can make the box any length depending on what you have an how many memorydex cards you have. Cut your length accordingly. For mine I cut as follows:
1 - 4" x12" sheet (base)
2 - 2" x12" pieces (sides)
1 - 3 7/8" x 2" piece
1 - 3 7/8" x 5" piece
1 - 4" x 2" piece
1 - 4" x 5" piece
2 - 1-1 1/2" pieces
For patterned paper, you'll need (covering the box inside and out)
1 4x12 sheet (bottom base)
1 3 7/8 x 11 3/4 (inside bottom)
2 5x12 sheets (sides)
1 5x5 (lower end)
1 5x7 (higher end)
You will also need two wooden dowels, the length of your box and the same size as your hole punch.
Tools needed: trimmer/cutter to cut chipboard and paper
double sided tape for structure strips
scrap card stock for structure strips
ruler
glue
scissors
Cropadlie or other heavy duty paper punch
I think that's it. Contact me if you have any questions or problems.










