Measure Interactively, Automate in Code, and Monitor and Debug Execution @NIApps
Measure Interactively, Automate in Code, and Monitor and Debug Execution  @NIApps
Uploaded October 2026 | Updated November 2026, 3 hours ago
Our next measurement is ripple, the small unwanted AC signal superimprosed on a DC output. In this video we get started in NI InstrumentStudio. InstrumentStudio supports project-based organization, allowing ripple measurements and rise time measurements that use the same physical oscilloscope and SMU to be saved as separate configurations, one set for AC measurements and one for DC measurements, without manually reconfiguring the instrument each time.
From there we move into LabVIEW, using InstrumentStudio alongside it to interactively monitor and debug our instruments while the code is running.
In the next video, an efficiency measurement is programmed using Python.

Video 6 of 9 | How to Build an Automated Electronics Test System with NI PXI

0:00 What ripple is and why it needs a different setup
0:24 Creating a ripple panel
0:51 Switching the scope channel to AC coupling
1:22 Adding peak to peak and FFT frequency measurements
1:48 Adding a frequency domain graph
2:26 Saving AC and DC configurations in one project
3:44 Running the ripple VI in LabVIEW with filtering
4:29 Setting sink current to 200 mA and hitting a fault
5:27 Debugging the compliance condition in InstrumentStudio
6:38 Resuming the VI with a known good configuration
7:19 Monitoring instruments while code runs

⚙️ Check out these useful resources:

New to NI PXI? Start here: bit.ly/4xMtcNJ
What Is NI InstrumentStudio™ Software? bit.ly/4hqy0SU
Using InstrumentStudio with Other Instruments youtube.com/playlist?list=PLbCk9hRe-ziGnN-N2xoXa75Buv1i_7_8_
What to learn more about box instrument vs PXI? Check out the head-to-head series How Much Time Are You Losing to Test System Rework? bit.ly/4ry1L8U
See Nigel in action across more of our videos youtube.com/playlist?list=PLbCk9hRe-ziGinerxTvXD-FO3TRnylbSK
Check out the InstrumentStudo manual for the latest support bit.ly/3TRxcPf

Products used:

NI PXI Chassis PXIe-1088: bit.ly/4xOSmLG, What Are NI PXI Chassis? bit.ly/4xUtlyW
NI PXI Controller PXIe-8822 bit.ly/4ymffra, What are NI PXI Controllers? bit.ly/4rCpyop
NI PXI Oscilloscope PXIe-5110 bit.ly/4dbbwEb What are NI PXI Source Measure Units (SMUs)? bit.ly/3VmcAyY
NI PXI Waveform Generator PXIe-5413 bit.ly/3Te5Z9f, What Are NI PXI Waveform Generators? bit.ly/4hBn4SJ
NI LabVIEW: bit.ly/4hRqVfx
Measure Interactively, Automate in Code, and Monitor and Debug ExecutionHow to simulate a NI mioDAQ on your computerWhats new in UHD 4.11Go Beyond Test: Harness Insights that Drive Powerful OutcomesHow the NI Platform Is Transforming Rail System InnovationGet Ready for NI Days 2026Can You Trust AI to Build a Critical Test System?​NI DAQ Hardware Ready to Ship NowSubscribe to NI AppsICYMI: Day 2 at #NIConnect 2026It’s time. Let’s Engineer Ambitiously.™NI Connect 2026 Highlights
NI Apps |

Measure Interactively, Automate in Code, and Monitor and Debug Execution

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER