Measure EMC using FFT with MSO1254HD-S with Micsig Current Probe and Micsig Differential Probe @kissanalog
Measure EMC using FFT with MSO1254HD-S with Micsig Current Probe and Micsig Differential Probe  @kissanalog
Uploaded May 2026 | Updated November 2026, 4 days ago
In this video 'Oscilloscope Measures EMC with MSO1254HD-S with Micsig Current Probe and Micsig Differential Probe' I will demonstrate how easy it is to measure EMC using the Power Analysis option while using the ITECH IT7321 AC power Supply.

This video contains affiliate links. If you purchase through them, I may earn a commission at no extra cost to you:
Link to Uni-T MSO1254-S: amzn.to/3RnH8yh

My storefront Link: amzn.to/4tj7COH
________________________________________________________________________
Your support is much appreciated;)
Patreon - I really do appreciate your support? This support helps me purchase the equipment I use for testing a reviews. Patreon.com/KissAnalog

Send your one time donation to PayPal at: KissAnalog@gmail.com
________________________________________________________________________
Vevor 3500 Watt pure sine wave inverter: amzn.to/41rt5JV
MWXNE 2000 Watt pure sine wave inverter: amzn.to/3Q1O1Vk

Link to filter: amzn.to/42Lxbh3

Link to 3in1 handheld scope: amzn.to/42A8yDO
15% off Code:HURABS54

15% off code: KA15
(Available sitewide at Kaiweets.com and it never expires.)
More offers from KAIWEETS: kaiweets.com/collections/electrical-testing?sca_ref=1269738.glN6S8aePH
(30% off code: KTI200) kaiweets.com/products/kti-200-thermal-camera?sca_ref=1269738.glN6S8aePH

0:00 Introduction: EMC Harmonics Testing with a Power Analyzer Scope
0:45 Why Power Supplies Put Noise Back onto the AC Line
2:05 Harmonic Distortion and THD Explained
4:10 How Rectifiers and Bulk Capacitors Create Current Spikes
6:05 IEC 61000-3-2 Harmonic Current Emissions Standard
7:20 IEC Classes A, B, C, and D Explained
8:40 Power Factor, VA vs Watts, and Reactive Power
11:05 How Active Power Factor Correction Improves Current Draw
13:05 Test Goal: Measuring IEC 61000-3-2 Class D Harmonics
13:45 Scope, Differential Probe, and Current Probe Setup
15:20 TI PFC Evaluation Board and Load Setup
17:20 Configuring Harmonics in the Scope Power Analysis Menu
18:35 Powering Up and Auto-Setting Voltage and Current Waveforms
20:00 Selecting IEC 61000-3-2 Class D Test Limits
21:10 Reviewing Harmonic Pass/Fail Results Through the 40th Harmonic
22:15 Histogram View and THD Measurement
23:35 Increasing Load and Watching THD Improve
24:50 Saving Harmonic Test Results as CSV and PDF
26:30 Copying Scope Files to a USB Drive
27:45 Reviewing the CSV and PDF Reports on a Mac
28:55 Final Thoughts: Scope Features and Clean Active PFC Performance
30:20 Audio Amplifier Power Factor Discussion and Wrap-Up
Measure EMC using FFT with MSO1254HD-S with Micsig Current Probe and Micsig Differential ProbeHappy New Year 2025 and Rant #KissAnalog #stateofchannel #whattoexpectin2026LLC Resonant or Soft Switching Scope Waveforms Texas Instruments UCC25600 #LLCconvFNIRSI FNB-C2 PD 3.1 USB C Tester 4-50V 6.5A 240W,PFC Converter Boost Inductor Current vs Input Power Waveforms #powerfactorcorrectionStep Load Testing: Burst Mode vs Constant Conduction mode #EPC91109 #LTC7890 #GaNconverterFluke 18B+ vs Ziboo 15B PRO multimeter review and tear down #Ziboo17Bpro #Fluke17B+ #fluke15B+Can your Current Probe do this? ZLProbe HFCP16X1A30 Rogowski AC current probe with MSO3054HD-SBattery Station Repair Pecron E600LFP #E1500LFP #MatrixPowerSupply #UNI-TpowersupplyLook inside Fosi ZA3 and V3 Mono - I compare these two amps using the TPA3255 Class D Amplifier chipAmazing Microscope Soldering Station - Andonstar AD409 Max-ES digital Microscope ReviewRedfish iDVM510 Multimeter teardown
Kiss Analog |

Measure EMC using FFT with MSO1254HD-S with Micsig Current Probe and Micsig Differential Probe

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER