Uploaded March 2026 | Updated November 2026, 2 days ago
In this video, weโre putting the Hikoki 36V Multi Volt Cordless Plunge Router to the test with a hefty half-inch roundover bit. Here are a few pro tips for getting the perfect edge:
Don't Rush the Cut: Never go full depth on your first pass with a large bit! Taking multiple shallower passes prevents chipping, kickback, and wood burn, while extending the life of your machine and your bits.
Utilize the Depth Stop: Set your final depth on the lowest stop, then bump it up to a medium setting for your first pass. It makes stepping down your cuts quick and perfectly accurate.
Dial in Your Speed: Bigger bits require slower speeds (around setting 4 or 4.5) because the outside edge is spinning much faster. Save the max speed settings for your thinner bits!
Watch Your Direction: Always push the router against the rotation of the blade (anti-clockwise when routing the outside edge of a board).
Safety First: The electronic brake on this Hikoki is an incredible feature. The bit stops instantly the second you release the trigger, giving you peace of mind when setting the tool down.
๐ www.toolcraft.co.za
๐ง Email: info@toolcraft.co.za
๐ Landline: 021 705 1247
๐ฑ WhatsApp: 067 954 8889
๐ Address: 95 Victoria Road, Plumstead, Cape Town
In this video, weโre putting the Hikoki 36V Multi Volt Cordless Plunge Router to the test with a hefty half-inch roundover bit. Here are a few pro tips for getting the perfect edge:
Don't Rush the Cut: Never go full depth on your first pass with a large bit! Taking multiple shallower passes prevents chipping, kickback, and wood burn, while extending the life of your machine and your bits.
Utilize the Depth Stop: Set your final depth on the lowest stop, then bump it up to a medium setting for your first pass. It makes stepping down your cuts quick and perfectly accurate.
Dial in Your Speed: Bigger bits require slower speeds (around setting 4 or 4.5) because the outside edge is spinning much faster. Save the max speed settings for your thinner bits!
Watch Your Direction: Always push the router against the rotation of the blade (anti-clockwise when routing the outside edge of a board).
Safety First: The electronic brake on this Hikoki is an incredible feature. The bit stops instantly the second you release the trigger, giving you peace of mind when setting the tool down.
๐ www.toolcraft.co.za
๐ง Email: info@toolcraft.co.za
๐ Landline: 021 705 1247
๐ฑ WhatsApp: 067 954 8889
๐ Address: 95 Victoria Road, Plumstead, Cape Town










