Uploaded August 2023 | Updated November 2026, 3 hours ago
One of the features of the FT-991A is its mode dependent settings. For example, if you use your rig primarily for digital modes such as FT8 and also voice ragchews, by selecting your mode to either data USB or USB, the settings for each will be adjusted to optimize your enjoyment of those modes.
The settings shown in this video are shown below:
Audio Transmit Settings
Menu 119 - center frequency of the low range parametric microphone equalizer
Menu 120 - gain of the low range parametric microphone equalizer
Menu 121 - bandwidth of the low range parametric microphone equalizer
Menu 122 to 124 - sets the center frequency, gain, and bandwidth of the mid-range parametric microphone equalizer.
Menu 125 to 127 - sets the center frequency, gain, and bandwidth of the high range parametric microphone equalizer.
Menu 128 to 136 – Sets the low, mid, and high ranges of the parametric microphone equalizer when your speech processor is turned on.
Receive Settings:
Menu 001 – AGC Fast Delay, used for CW, FM, and DATA-FM
Menu 002 – AGC Mid Delay, used for RTTY, DATA-LSB, and DATA-USB
Menu 003 – AGC Slow Delay, used for LSB, USB, and AM
AM Mode
Menu 041 – AM LCUT Freq
Menu 042 – AM LCUT Slope
Menu 043 – AM HCUT Freq
Menu 044 – AM HCUT Slope
Menu 045 – AM MIC Select
Menu 046 – AM Out Level
Menu 047 – AM PTT Select
SSB Mode
Menu 102 – SSB LCUT Freq
Menu 103 – SSB LCUT Slope
Menu 104 – SSB HCUT Freq
Menu 105 – SSB HCUT Slope
Menu 106 – SSB MIC Select
Menu 107 – SSB Out Level
Menu 108 – SSB PTT Select
FM Mode
Menu 074 – FM MIC Select
Menu 075 – FM Out Level
CW Mode
Menu 050 – CW LCUT Freq
Menu 051 – CW LCUT Slope
Menu 052 – CW HCUT Freq
Menu 053 – CW HCUT Slope
Menu 054 – CW Out Level
DATA Mode
Menu 060 – PC Keying
Menu 062 – DATA MODE
Menu 066 – DATA LCUT Freq
Menu 067 – DATA LCUT Slope
Menu 068 – DATA HCUT Freq
Menu 069 – DATA HCUT Slope
Menu 070 – DATA in select
Menu 071 – DATA PTT Select
Menu 072 – DATA Port Select
Menu 073 – DATA Out Level
RTTY Mode
Menu 092 – RTTY LCUT Freq
Menu 093 – RTTY LCUT Slope
Menu 094 – RTTY HCUT Freq
Menu 095 – RTTY HCUT Slope
Menu 099 – RTTY Out Level
Chapters:
01:37 Transmit Audio Settings
05:51 Receive Audio Settings
07:29 AM Mode Settings
09:01 SSB Mode Settings
11:14 FM Mode Settings
11:58 CW Mode Settings
13:09 DATA Mode Settings
14:30 RTTY Mode Settings
15:44 Programming with RT-Systems
Thanks for watching. Please remember to Like, Share, Comment, and please consider subscribing.
73 de Tom, ND3N
One of the features of the FT-991A is its mode dependent settings. For example, if you use your rig primarily for digital modes such as FT8 and also voice ragchews, by selecting your mode to either data USB or USB, the settings for each will be adjusted to optimize your enjoyment of those modes.
The settings shown in this video are shown below:
Audio Transmit Settings
Menu 119 - center frequency of the low range parametric microphone equalizer
Menu 120 - gain of the low range parametric microphone equalizer
Menu 121 - bandwidth of the low range parametric microphone equalizer
Menu 122 to 124 - sets the center frequency, gain, and bandwidth of the mid-range parametric microphone equalizer.
Menu 125 to 127 - sets the center frequency, gain, and bandwidth of the high range parametric microphone equalizer.
Menu 128 to 136 – Sets the low, mid, and high ranges of the parametric microphone equalizer when your speech processor is turned on.
Receive Settings:
Menu 001 – AGC Fast Delay, used for CW, FM, and DATA-FM
Menu 002 – AGC Mid Delay, used for RTTY, DATA-LSB, and DATA-USB
Menu 003 – AGC Slow Delay, used for LSB, USB, and AM
AM Mode
Menu 041 – AM LCUT Freq
Menu 042 – AM LCUT Slope
Menu 043 – AM HCUT Freq
Menu 044 – AM HCUT Slope
Menu 045 – AM MIC Select
Menu 046 – AM Out Level
Menu 047 – AM PTT Select
SSB Mode
Menu 102 – SSB LCUT Freq
Menu 103 – SSB LCUT Slope
Menu 104 – SSB HCUT Freq
Menu 105 – SSB HCUT Slope
Menu 106 – SSB MIC Select
Menu 107 – SSB Out Level
Menu 108 – SSB PTT Select
FM Mode
Menu 074 – FM MIC Select
Menu 075 – FM Out Level
CW Mode
Menu 050 – CW LCUT Freq
Menu 051 – CW LCUT Slope
Menu 052 – CW HCUT Freq
Menu 053 – CW HCUT Slope
Menu 054 – CW Out Level
DATA Mode
Menu 060 – PC Keying
Menu 062 – DATA MODE
Menu 066 – DATA LCUT Freq
Menu 067 – DATA LCUT Slope
Menu 068 – DATA HCUT Freq
Menu 069 – DATA HCUT Slope
Menu 070 – DATA in select
Menu 071 – DATA PTT Select
Menu 072 – DATA Port Select
Menu 073 – DATA Out Level
RTTY Mode
Menu 092 – RTTY LCUT Freq
Menu 093 – RTTY LCUT Slope
Menu 094 – RTTY HCUT Freq
Menu 095 – RTTY HCUT Slope
Menu 099 – RTTY Out Level
Chapters:
01:37 Transmit Audio Settings
05:51 Receive Audio Settings
07:29 AM Mode Settings
09:01 SSB Mode Settings
11:14 FM Mode Settings
11:58 CW Mode Settings
13:09 DATA Mode Settings
14:30 RTTY Mode Settings
15:44 Programming with RT-Systems
Thanks for watching. Please remember to Like, Share, Comment, and please consider subscribing.
73 de Tom, ND3N










