Uploaded December 2020 | Updated November 2026, 3 hours ago
Thank you for watching and subscribing xoxo
Be sure to check out Making Shoes Part 1 Getting Started & Patterning! This segment goes over all the tools and materials I used to make a pair of ankle boots.
youtube.com/watch?v=3VWuNB835N8
For this video I am making the uppers for a pair of ankle boots. The upper is the part of the shoe that goes over the top of your foot and ankle and wraps around to meet the soles. Part 3 details making the soles and will be posted in a few days! Be sure to hit that notification button so you can be one of the first to watch it.
1. Sew together the pattern pieces for the upper. You want to sew in any details in this step before starting construction. Be sure to pre-punch any holes for laces and attach and zippers or other closures as well!
2. Place the upper over the shoe last (the form) and apply glue to the edges. Then insert the cardboard midsole.
3. Stretch the upper tightly and hammer in small finishing nails to hold the material tightly while the glue is drying. I used a pair of pliers to help me grip the leather while stretching it.
4. After letting the glue dry (preferably overnight but check the dry time on the specific rubber cement glue you’re using), you can pull out all the nails. If any spots are not well adhered, repeat the previous step to add more glue underneath any edges with lifting and nail them tightly in place.
5. Stay tuned for the soles construction in Part 3
Thank you for watching and subscribing xoxo
Be sure to check out Making Shoes Part 1 Getting Started & Patterning! This segment goes over all the tools and materials I used to make a pair of ankle boots.
youtube.com/watch?v=3VWuNB835N8
For this video I am making the uppers for a pair of ankle boots. The upper is the part of the shoe that goes over the top of your foot and ankle and wraps around to meet the soles. Part 3 details making the soles and will be posted in a few days! Be sure to hit that notification button so you can be one of the first to watch it.
1. Sew together the pattern pieces for the upper. You want to sew in any details in this step before starting construction. Be sure to pre-punch any holes for laces and attach and zippers or other closures as well!
2. Place the upper over the shoe last (the form) and apply glue to the edges. Then insert the cardboard midsole.
3. Stretch the upper tightly and hammer in small finishing nails to hold the material tightly while the glue is drying. I used a pair of pliers to help me grip the leather while stretching it.
4. After letting the glue dry (preferably overnight but check the dry time on the specific rubber cement glue you’re using), you can pull out all the nails. If any spots are not well adhered, repeat the previous step to add more glue underneath any edges with lifting and nail them tightly in place.
5. Stay tuned for the soles construction in Part 3










