Making PVC Sleeves for Drift Trike @ScottBl8ke
Making PVC Sleeves for Drift Trike  @ScottBl8ke
Uploaded April 2018 | Updated November 2026, 1 hour ago
I made a bunch of PVC sleeves for my motorized drift trikes, like the "Lazier Boy" sofa chair. I cut the extra hard schedule 40 PVC pipe to fit snugly on 4.5" X 5" X 10" go kart tires. I also sell the PVC sleeves for $40 a pair on Etsy.
etsy.com/listing/580562164/set-of-2-pvc-sleeves-for-5-x-10-drift

I put a small strip of grip tape inside the PVC pipe to keep the sleeve from slipping off of the wheel. To install you must completely deflate the tire, slide the PVC over tire, inflate the tire.

Inner Diameter 9.91 inches / 25.17 cm
Outer Diameter 10.75 inches / 27.31 cm
Wall Thickness .42 inches / 1.06 cm
Sleeve Width 5 inches / 12.7 cm
Making PVC Sleeves for Drift TrikeNebraska Death Penalty Final Reading LB268Homemade Electric Skateboard 40 MPH / 65 KPH !Scanning QR Code Tattoos with Video Mapping InterfaceDeleted video🎨☝️Paint By FingerDeleted videoSouth Omaha Trail018627620020 - Kashi Chewy Happy Trail MixBarcode Andy Warhol on Wissen Macht Ah! in 2010Deleted videoFighter and The Kid Dick Supercut by Scott Blake
Scott Blake |

Making PVC Sleeves for Drift Trike

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER