Uploaded August 2025 | Updated November 2026, 5 hours ago
Making bonsai can be hard. The maintenance of a bonsai is another challenge but significantly less than making a bonsai. That is in most cases mame is an exception.
What makes mame bonsai so easy is they are practically little more than seedlings. As a consequence they don’t take much to create. A seemingly easy bonsai.
What makes meme so much more challenging are the same things that make a mame bonsai so easy to create. The small size of mame means an equivalently small bonsai pot. This spot is so small that it barely contains any soil. That lack of soil leads to low levels of retained moisture.
Without moisture the mame bonsai needs a lot more intensive care and maintenance.
This is where a simple solution using 3D printing comes into play. You can find a link to the relevant STL file on Thingiverse below.
What we have is a mame bonsai pot. The pot is different from a typical mame bonsai pot in that it contains a self water design component. The water reservoir provides a reliable supply of water that minimises the maintenance requirements as far water is concerned.
The design externally appears to be a regular mame pot for the most part. There are some tell tale signs but these can be foregone with the choice of a different print design.
If you are going to use this idea you should print he file with ABS or other filament. If you are not using ABS or similar weather resistant filament treat the pot to prevent problems.
Relevant links:
Japanese style self watering mame bonsai pot
thingiverse.com/thing:4342407
Making bonsai can be hard. The maintenance of a bonsai is another challenge but significantly less than making a bonsai. That is in most cases mame is an exception.
What makes mame bonsai so easy is they are practically little more than seedlings. As a consequence they don’t take much to create. A seemingly easy bonsai.
What makes meme so much more challenging are the same things that make a mame bonsai so easy to create. The small size of mame means an equivalently small bonsai pot. This spot is so small that it barely contains any soil. That lack of soil leads to low levels of retained moisture.
Without moisture the mame bonsai needs a lot more intensive care and maintenance.
This is where a simple solution using 3D printing comes into play. You can find a link to the relevant STL file on Thingiverse below.
What we have is a mame bonsai pot. The pot is different from a typical mame bonsai pot in that it contains a self water design component. The water reservoir provides a reliable supply of water that minimises the maintenance requirements as far water is concerned.
The design externally appears to be a regular mame pot for the most part. There are some tell tale signs but these can be foregone with the choice of a different print design.
If you are going to use this idea you should print he file with ABS or other filament. If you are not using ABS or similar weather resistant filament treat the pot to prevent problems.
Relevant links:
Japanese style self watering mame bonsai pot
thingiverse.com/thing:4342407










