Uploaded November 2017 | Updated November 2026, 3 days ago
I've been wanting to make this for awhile. I found the Targaryen sigil online then enlarged it and printed it out. I trimmed the excess paper and then taped it together. I sit that aside so I could make my wooden "canvas".
I used some left over 1x4 pine boards that I cut to 32 inches. I cut 7 pieces that ended up being about 34*1/2 inches wide. I attached a couple of scrap pieces of wood with glue and screws to the back of the boards to make my "canvas". Since this was for the Targaryen sigil I thought it was only fitting that I should torch the boards to get the black for the background. This worked fairly well but I did have to dust the canvas with a little black spray paint just to cover up some of the wood color coming through. After the paint dried I masked off the entire canvas and then centered and taped on my template. I used my razor to cut out the dragon design. Then I painted it a nice bright shade of red. While that paint dried I taped on the Targaryen words/motto "Fire and Blood" to the bottom portion. I cut out all the letters and then painted them red as well. I had to go dig the dragon cut out, out of the trash I forgot I still needed it for the details. I straightened out the piece and taped in place. I used a ball point pen to trace over the details of the dragon. The pen leaves an impression in the paint which I can then trace. I used a black paint marker for the details and also a white paint maker. When doing the detail work it helps to have a reference photo as well I usually just use my phone.
I'm really happy with how this came out I did have some trouble photographing it I don't think the pictures do the piece justice. The torching of the wood adds a nice char effect. I will be hanging this in my office next to my House Stark Sigil. Thanks for watching.
I've been wanting to make this for awhile. I found the Targaryen sigil online then enlarged it and printed it out. I trimmed the excess paper and then taped it together. I sit that aside so I could make my wooden "canvas".
I used some left over 1x4 pine boards that I cut to 32 inches. I cut 7 pieces that ended up being about 34*1/2 inches wide. I attached a couple of scrap pieces of wood with glue and screws to the back of the boards to make my "canvas". Since this was for the Targaryen sigil I thought it was only fitting that I should torch the boards to get the black for the background. This worked fairly well but I did have to dust the canvas with a little black spray paint just to cover up some of the wood color coming through. After the paint dried I masked off the entire canvas and then centered and taped on my template. I used my razor to cut out the dragon design. Then I painted it a nice bright shade of red. While that paint dried I taped on the Targaryen words/motto "Fire and Blood" to the bottom portion. I cut out all the letters and then painted them red as well. I had to go dig the dragon cut out, out of the trash I forgot I still needed it for the details. I straightened out the piece and taped in place. I used a ball point pen to trace over the details of the dragon. The pen leaves an impression in the paint which I can then trace. I used a black paint marker for the details and also a white paint maker. When doing the detail work it helps to have a reference photo as well I usually just use my phone.
I'm really happy with how this came out I did have some trouble photographing it I don't think the pictures do the piece justice. The torching of the wood adds a nice char effect. I will be hanging this in my office next to my House Stark Sigil. Thanks for watching.










