Making It Yourself - PVC Pipe File Storage Rack - Easy and Cheap @danthemakerman
Making It Yourself - PVC Pipe File Storage Rack - Easy and Cheap  @danthemakerman
Uploaded April 2018 | Updated November 2026, 3 hours ago
This is a super easy project that probably doesn't even need a video, but I decided to make one anyway. I usually store all my files in a drawer and I wanted a storage solution that allowed for easy access and clean up. I used some left over PVC pipe and scrap wood for this project. The stepped drill isn't necessary a simple 1/2 drill bit will do the trick just as well. I did have to alter the shape of one of the tubes to fit the rasp because it was too wide. So I used my heat gun to heat up the PVC and then just bend it in to shape. You could do this for all the files and have them only fit specific tubes that way if one is missing you would know which one specifically. This is a quick and dirty shop storage solution. The best part is it didn't cost me a dime and I didn't have to go to the store for any supplies to make it. Thanks for watching.
Making It Yourself - PVC Pipe File Storage Rack - Easy and CheapDIY | Upcycled Marius Stool | Ikea Hack | Making It YourselfWhat do you hear? about ||  a boatNeeded more work space so I made a foldout workbench addition. Build article @ www.Instructables.comPaduk and Wenge hand screw clamp I made from scratch including all the hardware.Colored Pencil Letter Opener - FAILMaking It Yourself - Star Wars Drawer PullsI Painted Joaquin Phoenix as Joker | Stencil and Airbrush PaintingSpider Gwen Comic Book Corner Art #laserengraver #marvel #spiderman #fanartBattery Powered LED Fairy Light Lamp - DIYMaking It Yourself - Punisher StencilHow To Make Black Micarta - Making It Yourself
Daniel Quiroz |

Making It Yourself - PVC Pipe File Storage Rack - Easy and Cheap

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER