Uploaded June 2022 | Updated September 2026, 2 weeks ago

---

In this video, I will show how I created large concrete pavers for a patio area. Although it is a lot of work, doing it yourself is cheaper than hiring a pro.

Check out my WOODWORKING PLANS gumroad.com/diycreators

Materials List (Affiliate links)
- 2''x4''x12' Lumber - homedepot.sjv.io/n1NvgV
- (40) 80lb bags of concrete mix homedepot.sjv.io/ZdXzqK
- (18) Leveling sand in bags - homedepot.sjv.io/yRyvWN
- Screws amzn.to/3QAxzXR

Tools (Affiliate links)
- Concrete Mixer - amzn.to/3HBKKUj
- Concrete placer amzn.to/3O8NqLC
- Concrete bull float - amzn.to/3aZKzGb
- Concrete trowel - amzn.to/3aZKzGb
- Wheelbarrow
- Speed square amzn.to/3N3YXuu
- Circular saw - amzn.to/3bdumgD
- Mini Palm Nailer - amzn.to/3HArjey
- Hammer


*******Quick Overview of the concrete slabs *******
Step 1. Pick a spot and flatten the soil.
Step 2. Cut 2x4 and build the frames.
Step 3. Cut stakes and drive them into the ground next to the concrete forms.
Step 4. Mix the concrete mix and pour the concrete mixture into the forms.
Step 5. Screed the top and trowel it after
Step 6. Pour the 6 slabs outside and pull off the forms after, leaving the middle.
Step 7. Pour the three middle slabs.
Step 8. Finally, remove the rest of the forms.


********** Support my work *********
• Timberland pro work gear - bit.ly/TimberlandPRO_DIYCreators
• Help me make more Video: patreon.com/diycreators
• Instagram: instagram.com/morediycreators
• twitter.com/Diycreators
• All my woodworking plans gumroad.com/diycreators

#concrete #concreteslab #patio