Making and Using a Drop-point Carbide-tip Hollowing Tool @RickTurnsWoodturning
Making and Using a Drop-point Carbide-tip Hollowing Tool  @RickTurnsWoodturning
Uploaded October 2018 | Updated November 2026, 3 hours ago
There is particular turning tool that has fascinated me for several years, but is too expensive for a cheapskate like me to buy. But this type of tool isn't that complicated, and can be made without too much in materials or tools (or skill). So I'm building this tool. And although I make a number of mistakes along the way, the tool ends up being usable...I just can't decide if it's better than other tools.

If you'd like to skip the tool-making and just see the tool in use, skip ahead to time 17.24.


The music during the close of the video, "Happy Little Elves" by Audionautix, is licensed under a Creative Commons Attribution license (creativecommons.org/licenses/by/4.0/)
Artist: audionautix.com
Making and Using a Drop-point Carbide-tip Hollowing ToolMake a tool rest - part 5 - CuttingWoodturning: An Oval Mulberry BowlAn Epoxy-and-peg Decorated BowlAn Aluminum Christmas Tree OrnamentA Tenon Cutter from a WrenchAn Absolutely Positively Food-safe Friction PolishMake a tool rest - part 3 - MaterialsWoodturning: A 1/4 Natural-edge BowlWoodturning: Some-Kinda-Wood VaseMicrocrystalline Wax - Part 4 - Testing for Moisture ResistanceAn update to my chuck removal tool
RickTurns |

Making and Using a Drop-point Carbide-tip Hollowing Tool

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER