Making a Thanksgiving Serving Tray on the CNC @ToolsToday
Making a Thanksgiving Serving Tray on the CNC  @ToolsToday
Uploaded November 2026 | Updated November 2026, 2 days ago
This entire Thanksgiving serving tray started as a single sheet of plywood. We V-carved the “Thankful” lettering, filled it with epoxy, surfaced it back flat and even cut the miters for the sides right on the CNC. After glue-up, we added splines to reinforce the corners and finished everything off into a serving tray that’s perfect for this time of year. Watch the full project: youtu.be/kmIk2yhFiWw
Plans for the Thankful Serving Tray: toolstoday.com/thankful-serving-tray-cnc-plans-downloadable-and-customizable.html
Check out the tools used on our website
--
Amana Tool RC-1141 Insert V-Groove 90° CNC Router Bit
toolstoday.com/v-15163-rc-1141.html
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
Depth Per Pass: .25"

Amana Tool RC-2265 CNC Spoilboard Surfacing Bit
toolstoday.com/v-14502-rc-2265.html
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Depth Per Pass: 0"

Amana Tool 46202-K 1/4" Spektra Coated Down-Cut Spiral Bit
toolstoday.com/v-13779-46202-k.html
RPM: 18,000
Feed Rate: 50ipm
Plunge Rate: 40ipm
Depth Per Pass: .25"

Amana Tool 46170-K 1/4" Spektra Coated Compression Spiral Bit
toolstoday.com/v-13354-46170-k.html
RPM: 18,000
Feed Rate: 50ipm
Plunge Rate: 40ipm
Depth Per Pass: .30"

Amana Tool 49498 Corner Rounding Bit
toolstoday.com/v-5849-49498.html
Amana Tool 47116 3-Flute Flush Trim Bit
toolstoday.com/v-5341-47116.html
Amana Tool 57187 4-Flute Multi-Trimmer Bit
toolstoday.com/v-11549-57187.html
STEPCRAFT M.1000 CNC Machine
toolstoday.com/stepcraft-m-1000-cnc-system.html
Vectric V-Carve Pro
toolstoday.com/cnc-machines-accessories/cnc-software.html
#cnc #shorts #woodworking
Making a Thanksgiving Serving Tray on the CNCSawstop T Glide Advanced Rip FenceFull Depth 1,000 IPM Real TimeMaking a Halloween Sign with Our CNC | ToolsTodayOur Unexpected Favorite Shop Tool!Cutting Square Curves with a JigsawCutting Giant Chamfer in OakBeginners Guide Episode 1: Cutting Juice Grooves with a Trim Router | 3 Easy DIY MethodsCarving a LogoMaking Reusable Jack O Lanterns on the CNCCutting Acrylic MirrorCutting Out the Pumpkin
ToolsToday |

Making a Thanksgiving Serving Tray on the CNC

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER