Uploaded February 2018 | Updated September 2026, 2 weeks ago

---

This coffee table was inspired by an original Sam Maloof dining table I found online. I did my best to draw it up in CAD which allowed me to cut out exact templates on the CNC router. I used heavy roundovers for the bulk of the shaping but used rasps, files, and sandpaper for the finer details.

The table is solid quarter sawn sapele I had leftover from the large apothecary chest build. I used 5 coats of thinned wipe-on poly for the finish.

Thanks for watching!

Here are products I like to use often in the shop. These are affiliate links. Purchasing through these links helps support the parillaworks channel. Thanks!

Dowelmax Dowelling Jig: amzn.to/2VCNRW9
Flat Bottom Grind Blade: amzn.to/2vo44Ec
Makita Trim Router: amzn.to/2IbBYOW
Dewalt Trim Router: amzn.to/2I9rEqO
Makita Track Saw: amzn.to/38dwyO5
Double Sided Tape: amzn.to/32Nxd82
¼” Spiral Flush Trim Bit: amzn.to/2uS2ZUQ
Narex Chisels: amzn.to/38fP3l7
amzn.to/2VETFi8
amzn.to/3crk34M
Mahoney’s Walnut Oil: amzn.to/2VETNy8

Website: parillaworks.com
Instagram: instagram.com/parillaworks