Uploaded September 2022 | Updated September 2026, 1 week ago
Drawings here! inheritancemachining.com/store/p/rotary-chuck-adaptor-drawing
Welcome back to the manual machine shop! Last video I walked through the process of reverse engineering a D1-5 camlock mechanism and manually drafting a rotary table chuck adapter based on that design. Now for the fun part... the machining! I’ll start with the most complicated part, the main body and walk through the process step by step. Including precision taper turning on the manual lathe, multiple milling and drilling setups with the rotary table on the vertical milling machine, and also nearly scrapping the part. But don’t worry, whenever there’s a mistake, there’s often a solution. Enjoy!
#inheritancemachining #machineshop #hobbymachininst
Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining
And a special thanks to my "Micrometer" level patrons!
Michael B., Joe W., ???, Kevers., lollomewire, Toon A., James, Noah, Michael G., Brennan M., Lachlan L., Jim A., Benjamin D., Grant F., Brendan W., Caleb T., Stephen Maus., Samuel G., Brenton, Ethan B., Chris W., Esti-Mari D., Matthew K., Terence K., Charles P., Michael T., Ben M., Jim H.
TIMESTAMPS
0:00 Intro
1:16 Turning the Taper
4:12 Necessary Preparations
5:29 Setup is Important
7:00 A Hole bunch of Wholes.. err
9:06 Turned on it's side
10:49 Regrouping
11:42 My wife should be a Machinist
13:14 Pandemonium
14:46 What I Should Have Done...
16:36 Dreaming of Bandsaws
17:29 Finishing Touches
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\
youtu.be/SCAVqHLWWsI
© 2022 Inheritance Machining, LLC. All Rights Reserved.
Drawings here! inheritancemachining.com/store/p/rotary-chuck-adaptor-drawing
Welcome back to the manual machine shop! Last video I walked through the process of reverse engineering a D1-5 camlock mechanism and manually drafting a rotary table chuck adapter based on that design. Now for the fun part... the machining! I’ll start with the most complicated part, the main body and walk through the process step by step. Including precision taper turning on the manual lathe, multiple milling and drilling setups with the rotary table on the vertical milling machine, and also nearly scrapping the part. But don’t worry, whenever there’s a mistake, there’s often a solution. Enjoy!
#inheritancemachining #machineshop #hobbymachininst
Patreon (Early Access + Ad Free + Drawings) - patreon.com/inheritancemachining
Instagram - instagram.com/inheritancemachining
Website - inheritancemachining.com
Amazon Storefront (affiliate links): amazon.com/shop/inheritancemachining
And a special thanks to my "Micrometer" level patrons!
Michael B., Joe W., ???, Kevers., lollomewire, Toon A., James, Noah, Michael G., Brennan M., Lachlan L., Jim A., Benjamin D., Grant F., Brendan W., Caleb T., Stephen Maus., Samuel G., Brenton, Ethan B., Chris W., Esti-Mari D., Matthew K., Terence K., Charles P., Michael T., Ben M., Jim H.
TIMESTAMPS
0:00 Intro
1:16 Turning the Taper
4:12 Necessary Preparations
5:29 Setup is Important
7:00 A Hole bunch of Wholes.. err
9:06 Turned on it's side
10:49 Regrouping
11:42 My wife should be a Machinist
13:14 Pandemonium
14:46 What I Should Have Done...
16:36 Dreaming of Bandsaws
17:29 Finishing Touches
FAQ
Drafting Equipment (affiliate links): amzn.to/3P0HvMe
A/V Equipment (affiliate links): amzn.to/3Pi45jB
Editing: Final Cut Pro X
Intro Song: Way Back Way Back When (Instrumental Version) - Gamma Skies
epidemicsound.com/track/SQxEhTVi9I/\
youtu.be/SCAVqHLWWsI
© 2022 Inheritance Machining, LLC. All Rights Reserved.
