Making a DIY Rolling Work Table for our Laser Engraver @geekbuildersnet
Making a DIY Rolling Work Table for our Laser Engraver  @geekbuildersnet
Uploaded March 2021 | Updated November 2026, 3 days ago
We recently purchased a Glowforge and needed a solid base for it to sit on. We originally had in on a folding table, but it was too low and not stable enough for the machine that weighs in at almost 50lbs., so I decided to build a custom rolling card with storage and a pullout drawer so a computer could sit on it.

The cart is primarily made from 2 x 4's from a big box store, but the legs are upcycled oak (I think) from an old palette that I've had lying around few a few years.

I modeled the cart in Fusion 360 so I could get accurate dimensions and make sure that everything was planned out ahead of time and it primarily fastened together with pocket holes.
**I highly recommend I Like to Make Stuff's Fusion 360 course if you are interested in learning the software.

The top was made from some left over hardboard and the bottom shelf was put together from some old flooring. The last finished touch was some rolling casters from Harbor Freight

**************************

Please consider subscribing and supporting the channel on Patreon.com/GeekBuilders​
or buying our custom designed shirts from TeeSpring
https://geekbuilders-shop.myteespring...​

For more info - Go to:
http://www.geekbuilders.net​
-------------------------------------------------------------------------
**YouTube has disabled comments on the video, please follow and comment on socials. Sorry for the inconvenience

---Follow and Subscribe---
twitter.com/geekbuilders​
instagram.com/geekbuilders​
facebook.com/geekbuilder​
twitch.tv/geekbuilders​

***Check out the Making Geeks Podcast**
http://www.makinggeeks.com​

---Music---
Music was Purchased from:
EpidemicSound.com
Making a DIY Rolling Work Table for our Laser EngraverSnap Ships Prototype :: Test DriveReview of the Brand New FlashForge Artemis 3D PrinterMaking a LED Mood Lamp :: LiveStreamNest Home Thermostat and Smoke Detector Unboxing and Installation :: Test DriveThe Anycubic Kobra X Just Killed the Budget MarketEnd of Year Wrap up Compilation Video :: GOMaking 30 videos in 30 Days //  ShortsAre Smaller Lasers Better :: Review of the Atomstack P7 Diode LaserEngrave Your Balls with the Ortur Rotary EngraverDo Not Buy the K40 Laser........UnlessThought Process and Mistakes during my Lightsaber Build :: Follow Up
GeekBuilders |

Making a DIY Rolling Work Table for our Laser Engraver

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER