Uploaded May 2019 | Updated November 2026, 3 days ago
In the run up to Makers Central 2019, we have made some aluminium ‘Maker Coins’ to trade with other makers at the event. If you are going to Makers Central then come and find us to trade coins! If you don’t have coins then we’ll be handing out stickers all weekend!
This was our first time experimenting with lost foam casting. The method worked well but we were too ambitions with the level of detail we were going for. The laser-cut stamp worked out great; and it saved a huge amount of time in the sand casting set up.
Consider supporting us on PATREON:
patreon.com/brothersmake
Follow us on INSTAGRAM:
instagram.com/brothersmake
Link to our MERCH store:
teespring.com/en-GB/stores/brothersmake
STARBOND SUPERGLUE 10% off using BROTHERSMAKE10 or click the link below:
starbond.com/?rfsn=3704868.592ffa8
In the run up to Makers Central 2019, we have made some aluminium ‘Maker Coins’ to trade with other makers at the event. If you are going to Makers Central then come and find us to trade coins! If you don’t have coins then we’ll be handing out stickers all weekend!
This was our first time experimenting with lost foam casting. The method worked well but we were too ambitions with the level of detail we were going for. The laser-cut stamp worked out great; and it saved a huge amount of time in the sand casting set up.
Consider supporting us on PATREON:
patreon.com/brothersmake
Follow us on INSTAGRAM:
instagram.com/brothersmake
Link to our MERCH store:
teespring.com/en-GB/stores/brothersmake
STARBOND SUPERGLUE 10% off using BROTHERSMAKE10 or click the link below:
starbond.com/?rfsn=3704868.592ffa8










