Uploaded July 2017 | Updated September 2026, 1 week ago

---

DIY Sim racing 3d printed magnetic shift paddles can be added to a custom wheel or upgrade to your sim racing wheel. These paddles would work great on an OSW or custom DIY F1, GT wheel.

--- Free download 3D Shifter files ------
amstudioprojects.com/shifters

Parts per Paddle Shifter
6x M3 Nuts ebay.us/S5tnyu
2x M3 Cap socket screws 10mm ebay.us/SUFQW9
5x M3 Cap socket screws 30mm ebay.us/SUFQW9
2x Neodymium magnets 8x5mm ebay.us/lm7RxK
1x Micro lever switch kw-10 ebay.us/n5Z6pn

Wire bit.ly/2J6PkgM
Hot glue bit.ly/3QdbptT
Superglue ebay.us/hEYjCv
Solder bit.ly/2MK4Tuy
Soldering Iron ebay.us/VIwU6k
This site contains affiliate links for which I may be compensated


Total cost breakdown of parts for the completed build seen in the video per assembled paddle shifter is $2.50 USD

Print settings printed on the Cocoon Create Touch
PLA - Black
Layer height 0.2mm
Infill - 50%

Thank you for watching, all questions and feedback are welcome.
If you know someone interested in this project please share the video with them.

Check here for other SIM Projects, Mods and DIY
youtube.com/channel/UCQS1ZB3BVSrBo3tCs7PyfxQ

|Shifter design Credit to JKOLJO|

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
creativecommons.org/licenses/by-nc-nd/4.0

Copyright
© AMSTUDIO 2018 All rights reserved | amstudioprojects.com