Make a Simple Bed Upgrade for the K40 Laser Engraver @geekbuildersnet
Make a Simple Bed Upgrade for the K40 Laser Engraver  @geekbuildersnet
Uploaded July 2020 | Updated November 2026, 3 days ago
The K40 laser engraver is a great low cost solution if you want to start laser cutting as a hobby, but it does need some upgrades to get the most out of it- one of the things it needs is an adjustable bed.

I already changed out the mirrors, lens and added an air assist, but the last major upgrade needed was a more dependable adjust able bed for the laser to accommodate for different material thicknesses.

The small surgical scissor lift works well, but it does have a small surface area. With my upgrade, I can adjust the bed without putting my arm in the laser and can make dynamic adjustments while the laser is working, although I do not entirely recommend this.

Overall, the upgrade works well, but I still might have to make some small adjustments for the future.

Check out my other laser video here for the full commentary and review.
youtu.be/QKyFfMGM3Bs

I have links below for a lot of the items I've used to upgrade the laser. You will be helping out the channel if you purchase anything from those links.

---Upgrades and Parts---
K40 Laser Cutter
amzn.to/2Uxcrad
K40 Air Assist
amzn.to/39rtjDd
Cable Drag Chain
amzn.to/2UOjL00
Laser Safety Glasses
amzn.to/2WVJeqQ
k40 Replacement Mirrors
amzn.to/2QYN4M2
Scissor Stand (To adjust work piece height)
amzn.to/2UuSUqY
Focal Lens for K40
amzn.to/3bDxPQy
Honeycomb Table
amzn.to/3bFW3Ki

---Guides---
Geeksmithing Review:
youtube.com/watch?v=_OuGBUAiyzQ
Geeksmithing Laser Safety:
youtube.com/watch?v=vxQRsUVmU2s
Geeksmithing DIY Rotary:
youtube.com/watch?v=GOF0u9qsFOI&t=19s

One of the Best Mirror Alignment Tutorials
https://k40laser.se/lens-mirrors/k40-mirror-alignment-and-leveling-old-guide/

Please consider subscribing and supporting the channel on Patreon.com/GeekBuilders

For more info - Go to:
geekbuilders.net

**YouTube has disabled comments on the video, please follow and comment on socials. Sorry for the inconvenience

---Follow and Subscribe---
twitter.com/geekbuilders
instagram.com/geekbuilders
facebook.com/geekbuilder
twitch.tv/geekbuilders

***Check out the Making Geeks Podcast**
makinggeeks.com

---Music---
Music was Purchased from:
EpidemicSound.com
Make a Simple Bed Upgrade for the K40 Laser EngraverMake a DIY Hardwood Headphone Stand :: How ToBambu Lab H2D First Impressions: Better Than Expected?I Tried the Atomstack Kraft Laser and Here’s What Happened!Make a Squirrel Feeder Picnic Table from Scrap // 30in30The Amazing XTOOL F1 - Small, Versatile, Full Featured #diy #lasers #xtoolf1 #xToolMake a DIY Baseball Swingline Trainer Batting Aid :: How ToGeekBuilders Live Stream40w of Pure Laser Power with the Bambu H2D LaserOrganize your Sunglasses and Keys with this one day buildMaking Custom Laser Cut Boxes That Will Blow Your Mind - AtomStack HurricaneThe WeCreat 40w Diode is Here!
GeekBuilders |

Make a Simple Bed Upgrade for the K40 Laser Engraver

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER