How Do You? DIY | Make a Glass Bottle Scoring Jig | Teardown @HowDoYouDIY | Uploaded April 2017 | Updated October 2024, 1 hour ago.
I'm going to so you how I made my bottle scoring jig, But here's the twist... I'm not building a new one. I tear this one down, then put it back together while I explain how I built it.
This link is the video that inspired the design of my scoring jig:
➞ youtu.be/3G-mgF2ZzZ4
My Instructables Link:
➞ instructables.com/id/Make-a-Bottle-Cutting-Jig-Teardown
My Second Channel:
➞ youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Tools Needed:
--------------------------------
Saw:
- Jig Saw (amzn.to/2xMdVBQ)
- or -
- Hand Saw (amzn.to/2yqVeRl)
Drill (amzn.to/2fzmdTN)
Long 1/4 Inch Drill Bit (amzn.to/2yNyvk1)
Long 1/8 Inch Drill Bit (amzn.to/2yfwvnz)
Hammer (amzn.to/2fFqDfJ)
3/8 Inch Drill Bit (optional, amzn.to/2xNun4Z)
▽ Parts Needed:
--------------------------------
2x4, at least 40 inches long
1 - 6 Inch Bolt, 1/4 x 20 tpi (amzn.to/2xJi73U)
2 - Wing Nuts (that fit the bolt, amzn.to/2yMPe6X)
3 - Fender Washers (amzn.to/2yNA7du)
1 - Cone Shaped Piece Of Wood (amzn.to/2yOLK3Y)
1 - 1/2 Inch Bolt, 1/4 x 20 tpi (amzn.to/2x3Mksv)
1 - 1 Inch Coupling Nut (that fits the bolt, amzn.to/2fEozVi)
10 - 6 Inch Wood Screws (amzn.to/2x3CUln)
6 - 1 1/2 Inch Wood Screws (amzn.to/2k9w9sd)
1 - Glass Cutter (amzn.to/2xJ4LnW)
2 - 2 Inch Wheels (amzn.to/2fFtUvx)
12 - Threaded Inserts (optional, amzn.to/2fEnInp)
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
DEAF KEV - Invincible [NCS Release]
➞ youtu.be/J2X5mJ3HDYE
Electro-Light - Symbolism [NCS Release]
➞ youtu.be/__CRWE-L45k
-----
▽ Follow DEAF KEV:
➞ SoundCloud - soundcloud.com/atm-dubstep
➞ Facebook - Facebook facebook.com/ATMDubstep
➞ YouTube - youtube.com/user/ATMDubstep
▽ Follow Electro-Light:
➞ Facebook - facebook.com/ElectroLightOfficial
➞ SoundCloud - soundcloud.com/maskedacoustic
➞ Twitter - twitter.com/ElectroLightEDM
➞ YouTube - youtube.com/user/ElectroLightOfficial
I'm going to so you how I made my bottle scoring jig, But here's the twist... I'm not building a new one. I tear this one down, then put it back together while I explain how I built it.
This link is the video that inspired the design of my scoring jig:
➞ youtu.be/3G-mgF2ZzZ4
My Instructables Link:
➞ instructables.com/id/Make-a-Bottle-Cutting-Jig-Teardown
My Second Channel:
➞ youtube.com/hdydiy
▽▽ ▽▽
If you would like to help support this channel, check out my Amazon affiliate links below. I earn a small commission for anything you buy after clicking them, and you don't pay any more than you normally would.
▽▽ ▽▽
My Amazon Storefront
➞ amazon.com/shop/howdoyoudiy
Just For Fun
➞ amzn.to/3RBtLIn
-----
▽ Tools Needed:
--------------------------------
Saw:
- Jig Saw (amzn.to/2xMdVBQ)
- or -
- Hand Saw (amzn.to/2yqVeRl)
Drill (amzn.to/2fzmdTN)
Long 1/4 Inch Drill Bit (amzn.to/2yNyvk1)
Long 1/8 Inch Drill Bit (amzn.to/2yfwvnz)
Hammer (amzn.to/2fFqDfJ)
3/8 Inch Drill Bit (optional, amzn.to/2xNun4Z)
▽ Parts Needed:
--------------------------------
2x4, at least 40 inches long
1 - 6 Inch Bolt, 1/4 x 20 tpi (amzn.to/2xJi73U)
2 - Wing Nuts (that fit the bolt, amzn.to/2yMPe6X)
3 - Fender Washers (amzn.to/2yNA7du)
1 - Cone Shaped Piece Of Wood (amzn.to/2yOLK3Y)
1 - 1/2 Inch Bolt, 1/4 x 20 tpi (amzn.to/2x3Mksv)
1 - 1 Inch Coupling Nut (that fits the bolt, amzn.to/2fEozVi)
10 - 6 Inch Wood Screws (amzn.to/2x3CUln)
6 - 1 1/2 Inch Wood Screws (amzn.to/2k9w9sd)
1 - Glass Cutter (amzn.to/2xJ4LnW)
2 - 2 Inch Wheels (amzn.to/2fFtUvx)
12 - Threaded Inserts (optional, amzn.to/2fEnInp)
-----
▽ Follow Me:
➞ Twitter - twitter.com/HowDoYouDIY
➞ Facebook - facebook.com/HowDoYouDIY
➞ Instagram - instagram.com/howdoyou.diy
➞ YouTube Second Channel - youtube.com/HDYDIY
-----
▽ If You Would Like To Support Me: (optional)
➞ buymeacoffee.com/HowDoYouDIY
➞ Or click the "Thanks" button below the video
-----
▽ Music:
DEAF KEV - Invincible [NCS Release]
➞ youtu.be/J2X5mJ3HDYE
Electro-Light - Symbolism [NCS Release]
➞ youtu.be/__CRWE-L45k
-----
▽ Follow DEAF KEV:
➞ SoundCloud - soundcloud.com/atm-dubstep
➞ Facebook - Facebook facebook.com/ATMDubstep
➞ YouTube - youtube.com/user/ATMDubstep
▽ Follow Electro-Light:
➞ Facebook - facebook.com/ElectroLightOfficial
➞ SoundCloud - soundcloud.com/maskedacoustic
➞ Twitter - twitter.com/ElectroLightEDM
➞ YouTube - youtube.com/user/ElectroLightOfficial
