Chris Riley | Magnetic Filament Monitor - Duet 3D - 2022 - Chris's Basement @ChrisRiley | Uploaded 2 years ago | Updated 10 hours ago
We have a Duet Magnetic Filament Sensor. This little guy is tricky, so we take you from start to finish. We'll show you how to assemble the sensor, install it on the printer, set up the firmware and go over a few troubleshooting options.
00:00 Introduction
00:55 The Duet Magnetic Filament Monitor
02:38 Assembly
08:28 Installation
10:53 Firmware Setup
12:35 Testing our Sensor
14:27 Duet Forums
15:12 New Housing
18:09 Troubleshooting
23:17 Conclusion
These are affiliate links and take you to Amazon.
------------------------------------------------------
Molex Connector Crimp Tool On Amazon:
https://geni.us/n3XRcz
------------------------------------------------------
Helpful Links:
Link to Duet 2 WIFI on Printed Solid:
https://www.printedsolid.com/products/duet2wifi
Duet 2 Filament Monitor Rotating Magnet On Printed Solid:
https://www.printedsolid.com/products/duet3d-filament-monitor-rotating-magnet-version
E3D Hemera Direct On Printed Solid:
https://www.printedsolid.com/products/e3d-hemera
Link to Duet Forums:
https://forum.duet3d.com/
Lo-Fi's forum post:
https://forum.duet3d.com/topic/27780/redesigned-the-mfm-housing?_=1654024242264
Sensor housing by Lo-Fi:
https://github.com/KerbalFoundries/Duet-Magnetic-Filament-Monitor-Housings
Duet sensor documentation:
https://docs.duet3d.com/Duet3D_hardware/Accessories/Rotating_Magnet_Filament_Monitor
SUPPORT THE CHANNEL BY CLICKING THESE LINKS!
OpenBuilds - Great CNC and 3D Printer Parts (aff)
https://openbuildspartstore.com/?ref=J_MTw1gGRuWps
Slice Engineering - Mosquito Hotends (aff)
https://www.sliceengineering.com/?p=ryaN5ML9B
Wham Bam Systems Flexible Beds (aff)
http://bit.ly/2HoS1cV
Amazon (aff) [US DE GB CA IT ES FR JP]:
https://www.amazon.com/?tag=chrisbasement-20
Banggood(aff) https://ban.ggood.vip/7vm3
Aliexpress(aff) http://s.click.aliexpress.com/e/UrRbCm8
Buy me a coffee to keep me going!
https://buymeacoff.ee/Wc0DouFbl
You can support my work on Patreon
https://www.patreon.com/brotherchris
One Time Tips, You Can PayPal Me:
https://www.paypal.me/ChrisRiley3D
----------------------------------------------
Find Me Over On Twitter!
----------------------------------------------
Twitter : http://twitter.com/ChrisRiley3D
FTC Disclaimer: A percentage of sales is made through Affiliate links
As an Amazon Associate I earn from qualifying purchases.
We have a Duet Magnetic Filament Sensor. This little guy is tricky, so we take you from start to finish. We'll show you how to assemble the sensor, install it on the printer, set up the firmware and go over a few troubleshooting options.
00:00 Introduction
00:55 The Duet Magnetic Filament Monitor
02:38 Assembly
08:28 Installation
10:53 Firmware Setup
12:35 Testing our Sensor
14:27 Duet Forums
15:12 New Housing
18:09 Troubleshooting
23:17 Conclusion
These are affiliate links and take you to Amazon.
------------------------------------------------------
Molex Connector Crimp Tool On Amazon:
https://geni.us/n3XRcz
------------------------------------------------------
Helpful Links:
Link to Duet 2 WIFI on Printed Solid:
https://www.printedsolid.com/products/duet2wifi
Duet 2 Filament Monitor Rotating Magnet On Printed Solid:
https://www.printedsolid.com/products/duet3d-filament-monitor-rotating-magnet-version
E3D Hemera Direct On Printed Solid:
https://www.printedsolid.com/products/e3d-hemera
Link to Duet Forums:
https://forum.duet3d.com/
Lo-Fi's forum post:
https://forum.duet3d.com/topic/27780/redesigned-the-mfm-housing?_=1654024242264
Sensor housing by Lo-Fi:
https://github.com/KerbalFoundries/Duet-Magnetic-Filament-Monitor-Housings
Duet sensor documentation:
https://docs.duet3d.com/Duet3D_hardware/Accessories/Rotating_Magnet_Filament_Monitor
SUPPORT THE CHANNEL BY CLICKING THESE LINKS!
OpenBuilds - Great CNC and 3D Printer Parts (aff)
https://openbuildspartstore.com/?ref=J_MTw1gGRuWps
Slice Engineering - Mosquito Hotends (aff)
https://www.sliceengineering.com/?p=ryaN5ML9B
Wham Bam Systems Flexible Beds (aff)
http://bit.ly/2HoS1cV
Amazon (aff) [US DE GB CA IT ES FR JP]:
https://www.amazon.com/?tag=chrisbasement-20
Banggood(aff) https://ban.ggood.vip/7vm3
Aliexpress(aff) http://s.click.aliexpress.com/e/UrRbCm8
Buy me a coffee to keep me going!
https://buymeacoff.ee/Wc0DouFbl
You can support my work on Patreon
https://www.patreon.com/brotherchris
One Time Tips, You Can PayPal Me:
https://www.paypal.me/ChrisRiley3D
----------------------------------------------
Find Me Over On Twitter!
----------------------------------------------
Twitter : http://twitter.com/ChrisRiley3D
FTC Disclaimer: A percentage of sales is made through Affiliate links
As an Amazon Associate I earn from qualifying purchases.
