Uploaded August 2015 | Updated November 2026, 2 days ago
This experiment demonstrates magnetic field modulation of a Theremin using a spinning top and a Hall-effect sensor. A neodymium magnet embedded in the top rotates near a fixed Hall sensor positioned adjacent to a magnifying mirror. As the top moves, variations in magnetic flux density are detected in real time.
The Hall-effect sensor converts these flux changes into voltage signals, which are routed to a modified Theremin circuit. The Theremin’s original RF oscillator has been reconfigured to operate as a Voltage Controlled Oscillator (VCO), allowing its output frequency to vary in response to the sensor’s input.
The result is a series of frequency-modulated audio signals that correspond directly to the magnet’s position, velocity, and proximity to the sensor. These signals produce dynamic sound effects that reflect the physical behavior of the rotating magnetic source.
Timestamps:
00:51 – Top collapse event
01:07 – High-frequency modulation (“tweeting”)
01:41 – Low-frequency sweep (“wha-wha”)
01:51 – Multi-band frequency shift resembling spacecraft modulation
Explore electronically controlled mechanisms in this playlist—from torsion pendulums and spinning tops to precision escapement systems:
youtube.com/playlist?list=PLCbYhDNjOviH74SJ1D5qCaCZQG2uldAmU
#soundeffects ##SFX #Gyroscope #DIYAudio #theremin #halleffect
This experiment demonstrates magnetic field modulation of a Theremin using a spinning top and a Hall-effect sensor. A neodymium magnet embedded in the top rotates near a fixed Hall sensor positioned adjacent to a magnifying mirror. As the top moves, variations in magnetic flux density are detected in real time.
The Hall-effect sensor converts these flux changes into voltage signals, which are routed to a modified Theremin circuit. The Theremin’s original RF oscillator has been reconfigured to operate as a Voltage Controlled Oscillator (VCO), allowing its output frequency to vary in response to the sensor’s input.
The result is a series of frequency-modulated audio signals that correspond directly to the magnet’s position, velocity, and proximity to the sensor. These signals produce dynamic sound effects that reflect the physical behavior of the rotating magnetic source.
Timestamps:
00:51 – Top collapse event
01:07 – High-frequency modulation (“tweeting”)
01:41 – Low-frequency sweep (“wha-wha”)
01:51 – Multi-band frequency shift resembling spacecraft modulation
Explore electronically controlled mechanisms in this playlist—from torsion pendulums and spinning tops to precision escapement systems:
youtube.com/playlist?list=PLCbYhDNjOviH74SJ1D5qCaCZQG2uldAmU
#soundeffects ##SFX #Gyroscope #DIYAudio #theremin #halleffect










