Uploaded December 2013 | Updated September 2026, 1 day ago
Get 70% OFF The Music I Use In My Videos!! USE CODE SAVE70 audiio.com/partner?oid=1&affid=1470
Dehancer Pro
Use Code GLEN10 for 10% Off Dehancer dehancer.com
Just picked up a set of Mackie MR8 MK2 studio monitors and wanted to share with you guys. This is my review / unboxing of the Mackie MR8 MK2 studio monitors, if you have any questions please feel free to ask. Below are the specs for the monitors and the link to Guitar Center where I purchased them. Thanks for whatching, please subscribe!
Speaker: amzn.to/2fFW6he
Guitar Center Link: guitarcenter.com/Mackie-MR8mk2-2-way-Reference-Monitor-106515661-i1823798.gc
Mackie MR8mk2 2-way Reference Monitor Specifications:
Acoustic Performance
Free Field Frequency Response: 40 Hz -- 20 kHz
Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input: 107 dB SPL @ 1m
Maximum SPL Per Pair: 119 dB SPL @ 1m
Transducers
Low frequency: 8 in / 204 mm hyperbolic curved cone woofer
High Frequency: Neodymium magnet driven 1 in / 25 mm silk dome tweeter
Amplifiers
Low frequency power:
100 watts, 4ω load; 200 watts peak
High Frequency power: 50 watts, 8ω load; 100 watts peak
Type: Monolithic IC, Class AB with DMOS power stage
Electronic Crossover
Crossover Type: 24dB/octave
Crossover Frequency: 3 kHz
Sensitivity: +4 dBu at 300 Hz for full output
Input Impedance: 20 Kω Balanced bridging; 10 kω unbalanced
Equalization
Low Frequency EQ: +2 dB/+4 dB @ 100 Hz, shelving
High Frequency EQ: ±2 dB @ 5 kHz, shelving
AC Power requirements
US: 120VAC, 60 Hz
AC Connector: 3-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 1.6AL/250 V; 230 VAC: T 800 mAL/250 V
Power Consumption: 75 watts with music, loud mix 10 watts quiescent (idle)
Physical Dimensions and Weight
Enclosure: 0.630" (16mm) thick MDF with 0.750" (16mm) MDF front panel
Damping: Adiabatic batting
Dimensions (H x W x D): 15.7" x 10.8" x 13.0" (400 x 277 x 330 mm)
Weight: 27.6 lb. (12.5 kg)
Mackie MR8mk2 2-way Reference Monitor Features:
150 watts total system power
High-resolution, powered studio reference monitor
Ultra low-distortion 8? LF driver
Long voice coil winding length allows high output with controlled low frequency performance
Optimally sized inverted dust cap stiffens cone for smooth response
Hyperbolic curved cone profile reduces severe cone resonances
High-output 1? soft dome tweeter
Neodymium magnet minimizes distortion and handles fast transients in dynamic source material
Ferro-fluid cooling protects against power compression
Acoustic absorption backing material provides smooth, reflection-free performance
Precision Class A/B amplification with Active protection circuits: 100W for LF / 50W for HF
Optimally sized custom waveguide provides seamless transition of HF and LF
Minimum-diffraction molded baffle imparts superior stereo imaging and depth
Adjustable HF and LF acoustic controls offer sonic tailoring to your mixing space
Flexible inputs include XLR, TRS and RCA connections
Magnetic shielding allows safe placement near computers and video monitors
Precisely tuned to work interchangeably with other MRmk2 monitors
Get 70% OFF The Music I Use In My Videos!! USE CODE SAVE70 audiio.com/partner?oid=1&affid=1470
Dehancer Pro
Use Code GLEN10 for 10% Off Dehancer dehancer.com
Just picked up a set of Mackie MR8 MK2 studio monitors and wanted to share with you guys. This is my review / unboxing of the Mackie MR8 MK2 studio monitors, if you have any questions please feel free to ask. Below are the specs for the monitors and the link to Guitar Center where I purchased them. Thanks for whatching, please subscribe!
Speaker: amzn.to/2fFW6he
Guitar Center Link: guitarcenter.com/Mackie-MR8mk2-2-way-Reference-Monitor-106515661-i1823798.gc
Mackie MR8mk2 2-way Reference Monitor Specifications:
Acoustic Performance
Free Field Frequency Response: 40 Hz -- 20 kHz
Sound Pressure Level @ 1 meter, +4 dBu into Balanced Input: 107 dB SPL @ 1m
Maximum SPL Per Pair: 119 dB SPL @ 1m
Transducers
Low frequency: 8 in / 204 mm hyperbolic curved cone woofer
High Frequency: Neodymium magnet driven 1 in / 25 mm silk dome tweeter
Amplifiers
Low frequency power:
100 watts, 4ω load; 200 watts peak
High Frequency power: 50 watts, 8ω load; 100 watts peak
Type: Monolithic IC, Class AB with DMOS power stage
Electronic Crossover
Crossover Type: 24dB/octave
Crossover Frequency: 3 kHz
Sensitivity: +4 dBu at 300 Hz for full output
Input Impedance: 20 Kω Balanced bridging; 10 kω unbalanced
Equalization
Low Frequency EQ: +2 dB/+4 dB @ 100 Hz, shelving
High Frequency EQ: ±2 dB @ 5 kHz, shelving
AC Power requirements
US: 120VAC, 60 Hz
AC Connector: 3-pin IEC 250 VAC, 16 A male
Fuse: 115 VAC: T 1.6AL/250 V; 230 VAC: T 800 mAL/250 V
Power Consumption: 75 watts with music, loud mix 10 watts quiescent (idle)
Physical Dimensions and Weight
Enclosure: 0.630" (16mm) thick MDF with 0.750" (16mm) MDF front panel
Damping: Adiabatic batting
Dimensions (H x W x D): 15.7" x 10.8" x 13.0" (400 x 277 x 330 mm)
Weight: 27.6 lb. (12.5 kg)
Mackie MR8mk2 2-way Reference Monitor Features:
150 watts total system power
High-resolution, powered studio reference monitor
Ultra low-distortion 8? LF driver
Long voice coil winding length allows high output with controlled low frequency performance
Optimally sized inverted dust cap stiffens cone for smooth response
Hyperbolic curved cone profile reduces severe cone resonances
High-output 1? soft dome tweeter
Neodymium magnet minimizes distortion and handles fast transients in dynamic source material
Ferro-fluid cooling protects against power compression
Acoustic absorption backing material provides smooth, reflection-free performance
Precision Class A/B amplification with Active protection circuits: 100W for LF / 50W for HF
Optimally sized custom waveguide provides seamless transition of HF and LF
Minimum-diffraction molded baffle imparts superior stereo imaging and depth
Adjustable HF and LF acoustic controls offer sonic tailoring to your mixing space
Flexible inputs include XLR, TRS and RCA connections
Magnetic shielding allows safe placement near computers and video monitors
Precisely tuned to work interchangeably with other MRmk2 monitors
