@CRG
  @CRG
CRG | Macintosh Classic Part 3 - it works! @CRG | Uploaded August 2020 | Updated October 2024, 13 hours ago.
I haven’t made a full video in a few weeks because this machine has been driving me nuts but it finally lives.

Its worth pointing out that I probably didn’t need to remove everything as I did but at least it allowed me to clean properly and gave me plenty of practise. If you have a wobbly screen and low voltages I’d recommend bathing the board in IPA first which should be enough, stripping it as I did really should be a last resort.

Massive thanks has to go to Adrian Black and the guys over at the vintage computer forums for all their advice that helped me get this old girl up and running once again.

Question is though, what can I do with this machine? Let me know in the comments because I really don’t know the first thing about Macs.

Music used in this video from nihilore.com with the following tracks used

Panthalassa
Sparkwood & 21
Terminant

CRG recently turned 2 years old. Thank you to everyone who has and continues to support me. Lots more still to come on CRG.

Don’t forget to like, subscribe, share and comment

I've created a dropbox link to the schematics for the analogue board in this machine - dropbox.com/s/x80hy38feysm9pw/Macintosh%20Classic%20Schematic%20%28bomarc%29.pdf?dl=0
Macintosh Classic Part 3 - it works!Macintosh Classic Part 110,000 subscriber donations special.Amiga Test Kit Serial and Parallel Dongles build and testTime for a bit of optical drive maintenanceNintendo Gameboy RefurbishmentZx Spectrum - spares or repairs but will it work? Part 12020 end of year pickups, donations and system build updates.

Macintosh Classic Part 3 - it works! @CRG

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER