Machining the Casting for the Multifix Lathe Solid Toolpost Riser @Clough42
Machining the Casting for the Multifix Lathe Solid Toolpost Riser  @Clough42
Uploaded September 2022 | Updated November 2026, 1 day ago
Support Clough42 on Patreon: patreon.com/clough42

The Multifix toolpost solid riser block is back from the foundry, so today we're going to machine it and get it installed on the lathe. Big thanks to Clarke at Windy Hill Foundry for doing the casting. It looks great, so now I just have to finish it without screwing it up.

See the casting process over at Windy Hill Foundry: youtu.be/-Og4CWMK7tw

Tools used in this video:
*This site contains affiliate links for which I may be compensated

Milwaukee M18 Wet/Dry Vacuum (Amazon*): amzn.to/3oIcSwB
Milwaukee Brushless Right Angle Die Grinder (Amazon*): amzn.to/3j8pqeh
3M 2" Roloc Disc Adapter (Amazon*): amzn.to/3E39hyX
Tegara 690X 6" Mill Vise (eBay*): ebay.us/wjC7Ii
Tegara 690X 6" Mill Vise (Amazon*): amzn.to/3TMDjQb
Shars 8" Dial Height Gauge (Amazon*): amzn.to/3S90nqX
Mitutoyo 4"/100mm Digital Caliper (Amazon*): amzn.to/3dEBDb2
Aventor 8" DPS IP54 Caliper (Amazon*): amzn.to/3KNwWaV
Starrett S828HZ Wiggler Set (Amazon*): amzn.to/3xNr24z
Edge Technology Clamp Indicator Holder (Amazon*): amzn.to/3MImlhf
Shars .0005" dial test indicator (Amazon*): amzn.to/3lo3Stq
Chicago Latrobe HSS Short Letter Drill Set (Amazon*): amzn.to/2PWx0dL
Chicago Latrobe HSS Short Number Drill Set (Amazon*): amzn.to/2Qgss0S
Chicago Latrobe HSS Short Franctional Drill Set (Amazon*): amzn.to/3mkmziD
Chicago Latrobe 3/4" Countersink (Amazon*): amzn.to/3s78x8l
Cap Screw Counterbore Set - Metric (Amazon*): amzn.to/3L2dWEK
Cap Screw Counterbore Set - Inch (Amazon*): amzn.to/3KZA8PK
Bondhus Metric Hex Key Set (Amazon*): amzn.to/3eqZzwb
Bondhus SAE Hex Key Set (Amazon*): amzn.to/3h9bJLZ

Raw Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 3.0 License
creativecommons.org/licenses/by/3.0

00:00 Introduction
00:29 The raw castings
01:32 Fettling
02:09 Establishing the first flat surface
04:07 Machining to width
06:15 Machining the top surface
07:20 Locating and drilling the toolpost hole
09:41 Drilling and counterboring the mounting holes
11:32 Machining to length
11:53 Test fitting on the lathe
13:45 Conclusion / Selling the castings?

tool post riser solid toolpost riser 40 position tool post grizzly g0602
Machining the Casting for the Multifix Lathe Solid Toolpost RiserCan We 3D-Print a Usable Part with Carbon-Fiber Nylon?Making a CNC Glass Cutter | Avid CNCAbusing Rogue Equipment | Adapting a Weight Stack Slinger Cable System to Work in an HR-2 Half RackDesigning a 3D Printed Pantograph Font | Fusion 360 TutorialBuilding a Tensile Tester the Easy (Lazy) Way!Will a Diode Laser Engrave Steel? | xTool D1 TestingPM728 Enclosure Wired and Running and Broken AlreadyGood Idea? I 3D Printed Custom Way Covers For My Milling Machine!Tramming Multiple Milling Machine Vises: The Easy WayThis CNC Machine Cuts Aluminum Like ButterCustom PCBs for the MASSO Control Cabinet: MASSO + ClearPath
Clough42 |

Machining the Casting for the Multifix Lathe Solid Toolpost Riser

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER