Uploaded May 2024 | Updated November 2026, 45 minutes ago
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This beginner-friendly locksport tutorial breaks down the lockpicking technique known as zipping—a fast, kinetic bypass method capable of opening standard pin-tumbler locks in seconds. Particularly effective on low-pin-count cylinders and entry-level padlocks lacking security pins, zipping uses rapid outward movement to bounce key pins upward so the driver pins catch cleanly above the shear line. This guide demonstrates how to apply proper rotational tension, select the right pick profile (standard hooks, half-diamonds, or rakes), and execute the swift extraction stroke that sets the pin stack.
Timestamps
0:00 Introduction
0:23 Zipping Technique & Execution
2:13 Outro
Lock Picking Tools:
Lock Pick Set: banggood.com/custlink/KG3yMWfEZm
Padlock Shims: banggood.com/custlink/Kmvyqrfhi1
Tubular Lock Pick Set: banggood.com/custlink/GmvYMWfYOK
Jiggler keys: https://link.amazon/B05L6Qnzw
Tools & Pick Profiles Covered
Tension Wrench (Bottom-of-Keyway or Top-of-Keyway): Maintains light rotational binding pressure on the cylinder plug.
Standard Hook Pick: Ideal for sharp, targeted contact across individual pin tips upward during extraction.
Half-Diamond Pick: Features an angled ramp profile that glides smoothly over steep key bitting without snagging.
Rake Picks (City Rake / Triple Peak): Broadens contact area for multi-pin kinetic bouncing across low-tolerance cylinders.
How the Zipping Technique Works
1. Apply Light Tension: Insert your tension wrench into the keyway and apply light, consistent turning pressure in the unlocking direction. Excessive tension will lock the pins in place and prevent them from bouncing freely.
2. Insert the Pick Deep: Slide your hook, half-diamond, or rake all the way to the back of the keyway beneath the pin stack without lifting any pins on the way in.
3. Execute the Zip: Apply moderate upward pressure against the pins and swiftly pull the pick straight out of the keyway in a single brisk motion—producing a distinct metallic "zip" as the pick tip bounces across each key pin.
4. Reset & Repeat: If the plug does not immediately turn, slightly vary your tension pressure and repeat the rapid extraction stroke until all driver pins settle above the shear line.
Educational & Legal Disclaimer
This video is produced strictly for educational purposes, physical security analysis, and recreational locksport. Only practice on locks that you personally own or have explicit authorization to manipulate. Never pick locks that are currently in active service on doors, gates, or security enclosures.
Music by Karl Casey @ White Bat Audio
#Lockpicking #Locksport #LockZipping #LockPicks #BeginnerLockpicking #VonMalegowski
©Von Malegowski. All Rights Reserved.
Gear & Studio Setup List: vonmalegowski.blogspot.com/2020/06/von-malegowskis-equipment-list-2020.html
This beginner-friendly locksport tutorial breaks down the lockpicking technique known as zipping—a fast, kinetic bypass method capable of opening standard pin-tumbler locks in seconds. Particularly effective on low-pin-count cylinders and entry-level padlocks lacking security pins, zipping uses rapid outward movement to bounce key pins upward so the driver pins catch cleanly above the shear line. This guide demonstrates how to apply proper rotational tension, select the right pick profile (standard hooks, half-diamonds, or rakes), and execute the swift extraction stroke that sets the pin stack.
Timestamps
0:00 Introduction
0:23 Zipping Technique & Execution
2:13 Outro
Lock Picking Tools:
Lock Pick Set: banggood.com/custlink/KG3yMWfEZm
Padlock Shims: banggood.com/custlink/Kmvyqrfhi1
Tubular Lock Pick Set: banggood.com/custlink/GmvYMWfYOK
Jiggler keys: https://link.amazon/B05L6Qnzw
Tools & Pick Profiles Covered
Tension Wrench (Bottom-of-Keyway or Top-of-Keyway): Maintains light rotational binding pressure on the cylinder plug.
Standard Hook Pick: Ideal for sharp, targeted contact across individual pin tips upward during extraction.
Half-Diamond Pick: Features an angled ramp profile that glides smoothly over steep key bitting without snagging.
Rake Picks (City Rake / Triple Peak): Broadens contact area for multi-pin kinetic bouncing across low-tolerance cylinders.
How the Zipping Technique Works
1. Apply Light Tension: Insert your tension wrench into the keyway and apply light, consistent turning pressure in the unlocking direction. Excessive tension will lock the pins in place and prevent them from bouncing freely.
2. Insert the Pick Deep: Slide your hook, half-diamond, or rake all the way to the back of the keyway beneath the pin stack without lifting any pins on the way in.
3. Execute the Zip: Apply moderate upward pressure against the pins and swiftly pull the pick straight out of the keyway in a single brisk motion—producing a distinct metallic "zip" as the pick tip bounces across each key pin.
4. Reset & Repeat: If the plug does not immediately turn, slightly vary your tension pressure and repeat the rapid extraction stroke until all driver pins settle above the shear line.
Educational & Legal Disclaimer
This video is produced strictly for educational purposes, physical security analysis, and recreational locksport. Only practice on locks that you personally own or have explicit authorization to manipulate. Never pick locks that are currently in active service on doors, gates, or security enclosures.
Music by Karl Casey @ White Bat Audio
#Lockpicking #Locksport #LockZipping #LockPicks #BeginnerLockpicking #VonMalegowski
©Von Malegowski. All Rights Reserved.










