Uploaded February 2026 | Updated September 2026, 13 minutes ago
Setting up a lock miter without chasing test cuts. Measured the stock with the MicroJig FITFINDER 1/2 Gauge, I used the auto half-thickness indicator to find center, and set the bit height off the Center Finding Platform milled into the lock miter bit. Once the height was right, it was just a fence adjustment to dial in the fit. All tools used are available from @toolstoday, check them out on our site!
-
MicroJig FITFINDER 1/2 Gauge, toolstoday.com/microjig-fn12-fitfinder-1-2-gauge.html
MicroJig FITFINDER Lock Miter Bit, toolstoday.com/microjig-mb-050-0750lm-fitfinder-lock-miter-router-bit-1-2-inch-shank.html
Microjig GO Push Block, toolstoday.com/microjig-gr2-go-grr-ripper2-go-push-block.html
JessEm Ultimate Excel II Package, toolstoday.com/jessem-ultimate-excel-ii-package.html
JessEm 05151 Dust Box for Router Tabletoolstoday.com/jessem-dust-box-for-router-table-05151
JessEm Mite-R-Slide II, toolstoday.com/jessem-new-mite-r-slide-ii.html
Setting up a lock miter without chasing test cuts. Measured the stock with the MicroJig FITFINDER 1/2 Gauge, I used the auto half-thickness indicator to find center, and set the bit height off the Center Finding Platform milled into the lock miter bit. Once the height was right, it was just a fence adjustment to dial in the fit. All tools used are available from @toolstoday, check them out on our site!
-
MicroJig FITFINDER 1/2 Gauge, toolstoday.com/microjig-fn12-fitfinder-1-2-gauge.html
MicroJig FITFINDER Lock Miter Bit, toolstoday.com/microjig-mb-050-0750lm-fitfinder-lock-miter-router-bit-1-2-inch-shank.html
Microjig GO Push Block, toolstoday.com/microjig-gr2-go-grr-ripper2-go-push-block.html
JessEm Ultimate Excel II Package, toolstoday.com/jessem-ultimate-excel-ii-package.html
JessEm 05151 Dust Box for Router Tabletoolstoday.com/jessem-dust-box-for-router-table-05151
JessEm Mite-R-Slide II, toolstoday.com/jessem-new-mite-r-slide-ii.html
