šŸ”“Livestream: SUG-ODD Assembly and Build @standupg4m3r
šŸ”“Livestream: SUG-ODD Assembly and Build  @standupg4m3r
Uploaded July 2025 | Updated September 2026, 26 minutes ago
This PC case was something I sketched on a napkin, and I'm going to see if its even possible to build.

You can check out the files here: printables.com/model/1348008-sug-odd-pc-gaming-case

Thank You and Enjoy!

If you want to support my projects, see secret updates, and help decide on future projects, become a member of my Patreon! patreon.com/stand_up_g4m3r

The guts:

ITX Motherboard
•320mm 3-Slot GPU (ex. RTX 4090 should work)
•SFX Power Supply
•40mm Heatsinks
•120mm AIOs
•16mm power button

The print:
•325mmx325mm+ printers can only join (tell Bambulabs to get with it)
•PETG-CF (Grey/White/Orange)
•0 Bottom and Top Layers for the panels (for mesh effect)
•Uses filament as alignment pins for gluing or welding

Affiliate Links:
Noctua L9a - amzn.to/4ixzSbP
Qidi Tech X-Max 3 - amzn.to/47ARpKC
PETG-GF White - amzn.to/4i4z3Ht
PETG-GF Gray - amzn.to/3Ge0u3U
16mm White LED PC Power Button - amzn.to/3FI0urY
M3 Assorted Silver Screws - amzn.to/4hCBpwV
M3 Assorted Black Screws - amzn.to/4b3zONZ
M3 Heat Inserts - amzn.to/4gswJZ6
30W Soldering Iron - amzn.to/3pZ74CH
Heat Insert Tip - amzn.to/3q3GhoG
Comparable Spool Dryer - amzn.to/47WBXsk
šŸ”“Livestream: SUG-ODD Assembly and BuildWhen the 3D Print starts, I get a warm feeling. #3dprinting #pc #gaming#3dprinting #design #gaming #pc #diyPrinting large flat pieces in ABS, is difficult & should be avoided… agree or naw? #3dprinting #diyLonger Video Cards Inside the Asrock DeskMeet with 3D PrintingWhen humans are gone and Aliens visit, they will witness our deity, the Benchy #3dprinting #techWhen I think of people who are into #3dprinting I imagine they #hoard #hardware like you see herešŸ˜‚#3dprinting is two hobbies rolled into one; machine upkeep and actual printing. No matter the brand!Revision to the APU 3D Printed Case will be a dedication…The Steam Machine is too expensive… I’m going to 3D Print another one!3D Print Your Own DIY Steam MachineCan you still use filament from 2012? Will 1.8mm filament work with 1.75mm extruders?šŸ‘ #3dprinting
stand_up_g4m3r |

šŸ”“Livestream: SUG-ODD Assembly and Build

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER