Live Q&A #351 – Thread Milling with Special Guest Dwayne Ruthig @MarkLindsayCNC
Live Q&A #351 – Thread Milling with Special Guest Dwayne Ruthig  @MarkLindsayCNC
Uploaded August 2026 | Updated November 2026, 3 hours ago
More down here ↓↓↓ Click MORE!

In this live stream my special guest Dwayne Ruthig will lead a discussion and demonstration of thread milling on the CNC using the Vectric Thread Milling Toolpath.

Dwayne is well versed and very experienced with using the Thread Milling toolpath found in Vectric VCarve and Aspire. We will focus on internal threads, as well as external threads, both with and WITHOUT using a rotary axis. We’ll discuss the tools needed, work holding, and necessary points to take into account before cutting the threads on a box, in a box lid, as well as carving a nut and bolt.

Remember that I host these Live Q&A discussions every Sunday at Noon Pacific Time, 3 pm Eastern Time, so SUBSCRIBE to my channel to stay up to date!

As usual, if you have any comments or questions, please put ‘em in the comment section below.

Thanks for watching!


Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:

Link to Micro 100 TM 375 60D thread milling bit: micro100.com/products/tool-details-tm-375

Affiliate link to Magnate 751 thread milling bit: amzn.to/4x7GVyE

Affiliate link to Magnate 796 90D .625 thread milling bit: amzn.to/4gDoc7Q

Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick

Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz

Link to Laney Shaughnessy’s YouTube channel SpindleTV: youtube.com/@SpindleTV

Link to the Vectric V12+ For Absolute Beginners Playlist: youtube.com/playlist?list=PLLuYLaC3-QRMFBT-TzIbMyGtuBurt8GCQ

Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p

Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC

Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE

______________________________________________________________________________

Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join

Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join

Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.

Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA

______________________________________________________________________________

If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below:

PayPal: paypal.me/MarkLindsayCNC
___________________________________________________________________________________

Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
marklindsaycnc.com/index.php/product-category/logo-products

marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
___________________________________________________________________________________

For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com

For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
vectric.com

For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric

__________________________________________________________________________________

Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.

I appreciate your support!

This video is for informational and entertainment purposes only.

#Aspire #VCarvePro #Tutorial #Beginner
Live Q&A #351 – Thread Milling with Special Guest Dwayne RuthigVectric V12+ for the Absolute Beginner – Part 1 – Job Setup and Vector SelectionLive Q&A #299 – Open Q&ALive Q&A #334 - Open Q&ALive Q&A #355 - Open Q&ALive Q&A #258 – Vectric V12+ for the Absolute Beginner – Part 6Live Q&A #209 – Open Q&ALive Q&A #252 – Open Q&ALive Q&A #319 – Open Q&AA Very Special Gift From My Channel MembersLive Q&A #303 – Special Guest – Nick FrenchLive Q&A #267 – Special Guest - Greg from STL Woodworking
Mark Lindsay CNC |

Live Q&A #351 – Thread Milling with Special Guest Dwayne Ruthig

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER