Mark Lindsay CNC | Live Q&A #239 – Vectric V12 Release Part II – Open Q&A @MarkLindsayCNC | Uploaded 5 months ago | Updated 2 hours ago
Live Q&A #239 – Vectric V12 Release Part II – Open Q&A
More down here ↓↓↓ Click MORE!
In this live stream we’ll continue our discussion of the release of Vectric Cut2D, VCarve, and Aspire Version 12. I will not be demonstrating any new toolpaths (that will come in future videos,) but I will be delving into a few of the new features. This will be in addition to our regular Open Live Q&A, where I'll answer your general CNC or Vectric Software questions.
Remember that I host these Live Q&A discussions every Sunday at Noon Pacific Time, 3 pm Eastern Time, so SUBSCRIBE to my channel to stay up to date!
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:
Link to Rob Shuster's interview with IDC Woodcraft: youtube.com/watch?v=2fOQioAy18c
Link to Rob Shuster's YouTube channel: youtube.com/@sidewinderdrums
Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick
Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz
Link to Laney Shaughnessy’s YouTube channel SpindleTV: youtube.com/@SpindleTV
Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join
Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join
Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.
Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below:
PayPal: paypal.me/MarkLindsayCNC
___________________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
___________________________________________________________________________________
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric
Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640
__________________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner
Check out StreamYard: streamyard.com/pal/d/5708919750000640
Live Q&A #239 – Vectric V12 Release Part II – Open Q&A
More down here ↓↓↓ Click MORE!
In this live stream we’ll continue our discussion of the release of Vectric Cut2D, VCarve, and Aspire Version 12. I will not be demonstrating any new toolpaths (that will come in future videos,) but I will be delving into a few of the new features. This will be in addition to our regular Open Live Q&A, where I'll answer your general CNC or Vectric Software questions.
Remember that I host these Live Q&A discussions every Sunday at Noon Pacific Time, 3 pm Eastern Time, so SUBSCRIBE to my channel to stay up to date!
As usual, if you have any comments or questions, please put ‘em in the comment section below.
Thanks for watching!
Links to videos, Playlists, YouTube channels, products, and supplies as discussed in this video:
Link to Rob Shuster's interview with IDC Woodcraft: youtube.com/watch?v=2fOQioAy18c
Link to Rob Shuster's YouTube channel: youtube.com/@sidewinderdrums
Link to Michael Mezalick’s YouTube channel: youtube.com/user/mezalick
Link to CNCnutz (Peter Passuello’s) YouTube channel: youtube.com/c/cncnutz
Link to Laney Shaughnessy’s YouTube channel SpindleTV: youtube.com/@SpindleTV
Link to the Vectric for the Absolute Beginner Playlist: youtube.com/playlist?list=PLLuYLaC3-QRNuVTej2P5emp1D4_Tm774p
Link to the 3D Modeling for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QRPb0jNAfuB-xOlAUHWl1wkC
Link to the V-Carving for the Absolute Beginner playlist: youtube.com/playlist?list=PLLuYLaC3-QROVf1Ua9BhGCzBty2FhZFmE
______________________________________________________________________________
Click the JOIN button to get access to perks: youtube.com/marklindsaycnc/join
Here’s a link to a YouTube page that gives you more info about Channel Memberships, how to join, upgrade or downgrade your membership, or how to cancel your membership: youtube.com/intl/en_au/join
Please remember that I am NOT a CNC expert, and I cannot help you troubleshoot your CNC router. Every CNC router, controller, and controller software is different. Your best option is to contact your CNC manufacturer’s Tech Support division, or look for a Support Forum or Support Community through their website. They are the people who know your machine best, while I would only be guessing.
Link to Mark’s Other Channel. My second YouTube channel that’s dedicated to non-CNC related projects. youtube.com/channel/UCXMdT30E3tx7myvt9jGx-pA
______________________________________________________________________________
If you’d like to support my channel, help fund the shop/shed build, and help with the making of future videos, you can donate by using the link below:
PayPal: paypal.me/MarkLindsayCNC
___________________________________________________________________________________
Get your Official Mark Lindsay CNC T-shirts and coffee mugs here:
http://marklindsaycnc.com/index.php/product-category/logo-products
marklindsaycnc.com is sponsored by Harneal Media – a website developing company that specializes in websites for the maker community. Find out more at:
harnealmedia.com
___________________________________________________________________________________
For more info, or to configure an Avid CNC of your own, visit their website: avidcnc.com
For more information on, or to download a free trial of Cut 2D, VCarve, or Aspire, visit the Vectric website at:
http://www.vectric.com
For more tutorials on how to use Vectric Software, as well as some very cool projects, visit and subscribe to Vectric’s YouTube channel: youtube.com/user/Vectric
Interested in hosting your own live streams? Check out StreamYard: streamyard.com/pal/5708919750000640
__________________________________________________________________________________
Some links may be affiliate or sponsor links. Purchasing or even clicking through these links helps with the making of future videos.
I appreciate your support!
This video is for informational and entertainment purposes only.
#Aspire #VCarvePro #Tutorial #Beginner
Check out StreamYard: streamyard.com/pal/d/5708919750000640