Live Monitor 3D 180° in Apple Vision Pro | URSA Cine Immersive & Canon VR @hughhou
Live Monitor 3D 180° in Apple Vision Pro | URSA Cine Immersive & Canon VR  @hughhou
Uploaded July 2026 | Updated November 2026, 1 day ago
New live camera 2.0 update is here: youtu.be/jdz6AjiDxwo
Learn how to live preview 3D 180 from a Blackmagic URSA Cine Immersive or Canon R5C with dual fisheye lens inside Apple Vision Pro, using the free Spatial Film app.

Every immersive film set has the same problem. The monitor shows two fisheye circles, the camera touchscreen shows two fisheye circles, and the director who needs to see the actual shot is looking at two fisheye circles too. You block the scene, you guess, and you find out tomorrow when dailies come back.

This free solution fixes it.

The Live Camera pipeline in Spatial Film runs true stereoscopic 3D 180 on Apple Vision Pro with correct left eye and right eye reprojection. No subscription. No tether on the headset. It runs over NDI.

For the URSA Cine Immersive, the STMap is built from the camera's own ILPD lens calibration data, the same Immersive Lens Profile Data Apple's pipeline uses to reproject every pixel. What you frame on set is what lands in final delivery. The app also pulls camera status over the 10G Ethernet port: REC tally, timecode, ISO, shutter angle, aperture, white balance, ND and battery voltage.

CHAPTERS

00:00 - The problem with immersive monitoring on set
00:46 - What Live Camera does, and why it is free
01:39 - Full signal chain: 12G SDI to capture card to NDI to Spatial Film
02:33 - URSA Cine Immersive STMap and ILPD explained
03:07 - Live camera status: tally, timecode, ISO, ND, battery
03:39 - Complete gear list
04:39 - The Ethernet rule that makes or breaks the feed
05:17 - Latency Test
05:33 - Wireless directing and one-tap Vision Pro passthrough
06:00 - Canon R5C and R5 Mark II dual fisheye livestream setup
06:20 - Importing the Canon STMap and Canon Log LUTs
06:47 - Troubleshooting: manual NDI IP entry
07:00 - Direct URSA Cine Immersive Camera Controls inside Vision Pro

WHAT YOU NEED

Camera: Blackmagic URSA Cine Immersive, Canon R5C or R5 Mark II with the RF 5.2mm dual fisheye, or a RED V-Raptor VR rig.
Signal path: 12G SDI out to a Blackmagic 12G to HDMI converter, then 4K HDMI into a capture card such as a Magewell. Or run 12G SDI straight into a Blackmagic DeckLink 8K card in a PCIe slot.
NDI sender: a laptop running free OBS Studio with NDI output enabled, Mac or PC. A hardware NDI encoder also works and removes the computer entirely.
Network: a dedicated router for the set. Do not use the production office Wi-Fi.
Headset: Apple Vision Pro running visionOS 26 or later with Spatial Film installed.

THE ONE RULE THAT MATTERS

Wire the NDI sender to the router with an Ethernet cable. A full quality 4K NDI feed needs steady bandwidth. If the sender and the headset are both on Wi-Fi they fight for the same air and the feed starves. Sender on cable, Vision Pro on 5 GHz or 6 GHz, close to the router.

LINKS

Spatial Film on Apple Vision Pro: apps.apple.com/us/app/spatial-film/id6670564820
Spatial Film Live Camera Written Guide: https://spatial.film/live-camera
Patreon Guide and download: patreon.com/HughHouFilm/posts/monitor-ursa-and-164917165
Canon dual fisheye STMap EXR file: patreon.com/HughHouFilm/posts/how-to-stream-vr-114989539
Meta Quest version of this setup, same hardware and same logic: youtu.be/iTKoGBXQ6gA
Full gear list:
URSA Cine Immersive: bhpho.to/43CLLb5
Megawell 4K Plus: amzn.to/3Uv94PD | B&H: bhpho.to/4foWsEz
Blackmagic Micro Converter BiDirectional SDI/HDMI 12G: amzn.to/4fq4Roa | B&H: bhpho.to/44O8e5g
12G SDI Right-Angle BNC Cable: amzn.to/4fykFHb
SmallRig Mini-HDMI to HDMI: amzn.to/3NLg2Mp
Canon R5 Mark II: bhpho.to/46jiWkd
Canon R5 C VR180 Creator Kit: bhpho.to/3wqxVLa
RED V-RAPTOR [X]: bhpho.to/3Y6yKnE
Dual Fisheye Lens: bhpho.to/3Hs1qwj

🐕 FOLLOW ME & Kimchi:
➜ Instagram: instagram.com/hugh.hou
➜ Facebook: facebook.com/360creator
➜ TikTok: tiktok.com/@hughhou
🤝 Kimchi is open for HIRE! Reach out: hi[at]hughhou.com

#AppleVisionPro #ImmersiveVideo #URSACineImmersive
Live Monitor 3D 180° in Apple Vision Pro | URSA Cine Immersive & Canon VRInsta360 X6 Easy Video Idea 💡 The Impossible POV ShotInsta360 X6 vs X5 Underwater: Only One Needs a Lens SwapBro thought it was a metal detector 🤣 Insta360 X6 Spatial Capture - 360 Video to Gaussian SplatEncode APMP for Vision Pro: Apple Projected Media Profile for 360 & 180 Video5-Min Waterfall Meditation in VR180 | Multnomah Falls, OregonInsta360 X6 Spatial Capture on Vision Pro? Free Local Gaussian Splats vs the CloudInside Catherine de Medicis Castle - Chenonceau in 8K VR180 | Vision Pro, Quest 3 & Galaxy XREasy AI Tripod Removal in 360 Video | DJI OSMO 360 & Insta360 X5 TutorialHow I Offload 2 URSA Cine Immersive FASTInsta360 X6 First Look: The Best Action 360 Camera Right Now?Wide FOV APMP on Apple Vision Pro: Insta360 X5 vs Ace Pro 2
Hugh Hou |

Live Monitor 3D 180° in Apple Vision Pro | URSA Cine Immersive & Canon VR

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER