Uploaded June 2025 | Updated November 2026, 3 hours ago
Exollent 2, POC open Loop, is shown with left and right hip joints cycling at 180 degrees out of phase, in synch with user's gait cycle. Arduino controller with 24V power supply was used for the linear actuators. Open loop gait parameters, V and t, were tuned for PWM velocity of 200/255 * max RPM, at 1 sec steps. Results conclude a series of POC RL modeling, simulations, system analysis, subassembly testing, electromechanical integration and gait testing, covering major knowledge gaps in developing an exoskeleton with AI/ML control. This video represents a sample of a typical system test in SAAR's business development process.
____________________________________________________
Test Number: EX2_LG_LRH_001
Title: Exollent 2 Live Gait Test Left and Right Hips
Date: April 22, 2022
Time: 11:30 am
Tester: BE
Short term objective: Run live gait to determine feel of stance and swing
Long term objective: Tune open loop parameters for safe gait with poles
Test phases timing:
* Upload gait program: 10 sec
* Exo dress up: ~2:20 min
* Gait run (8 steps) 8 sec
* Exo dress down 30 sec
* Exo restocking 15 sec
Total test time: 3:31 min
Results: Quick software upload to controller. Fast dress up and dress down by user. Synched gait posture with programmed gait cycle. No force stress feeling at torso link of stance leg, swinging force feel of lifted swing leg.
Recommendations: connect 2 more amplifiers for Left and right shanks. Program the open loop gait for 4 axes, tune 8 parameters in dry runs and test in live gaits.
Exollent 2, POC open Loop, is shown with left and right hip joints cycling at 180 degrees out of phase, in synch with user's gait cycle. Arduino controller with 24V power supply was used for the linear actuators. Open loop gait parameters, V and t, were tuned for PWM velocity of 200/255 * max RPM, at 1 sec steps. Results conclude a series of POC RL modeling, simulations, system analysis, subassembly testing, electromechanical integration and gait testing, covering major knowledge gaps in developing an exoskeleton with AI/ML control. This video represents a sample of a typical system test in SAAR's business development process.
____________________________________________________
Test Number: EX2_LG_LRH_001
Title: Exollent 2 Live Gait Test Left and Right Hips
Date: April 22, 2022
Time: 11:30 am
Tester: BE
Short term objective: Run live gait to determine feel of stance and swing
Long term objective: Tune open loop parameters for safe gait with poles
Test phases timing:
* Upload gait program: 10 sec
* Exo dress up: ~2:20 min
* Gait run (8 steps) 8 sec
* Exo dress down 30 sec
* Exo restocking 15 sec
Total test time: 3:31 min
Results: Quick software upload to controller. Fast dress up and dress down by user. Synched gait posture with programmed gait cycle. No force stress feeling at torso link of stance leg, swinging force feel of lifted swing leg.
Recommendations: connect 2 more amplifiers for Left and right shanks. Program the open loop gait for 4 axes, tune 8 parameters in dry runs and test in live gaits.










