Uploaded November 2011 | Updated November 2026, 4 hours ago
beeman715 made a comment on my Little Soda Can Stove V3.1 - Yodo Mod Boil Test 1 video:
"I am curious to see how Isopropyl 90% would work in that stove. Given the space between the? wicks and the pot I don't think it would smut your pot."
So in this video I use 91% isopropyl alcohol in the Little Soda Can Stove V3.0 the Yodo mod in it. To "Yodo" mod the stove I ran 1/16 inch diameter round, braided fiberglass wick through the jet holes of the stove.
I bought the wick from Canteen Gear Shop at $.17 a foot which worked out to $9.00 for 50 feet. You can find the Canteen Gear Shop at the following address:
canteengearshop.webs.com
To see where I got the "Yodo" mod idea from check out the following video:
"Auto preheating side burner for alcohol stove"
youtube.com/watch?v=PQm_ATSsjHg
Thanks for watching my video,
Hiram
Lab0210
Title: Little Soda Can Stove V3.1 - Yodo Mod Boil Test 2
Room temp: 63°
Humidity: 58%
Weather condition: Sunny & Breezy
Burner: Little Soda Can Stove (LSCS) V3.1 - Fizz Ed 8.4 fluid ounce size can - Yodo mod stove #4
Stove/Pot stand: Little Soda Can Stove (LSCS) V3.1
Pot: Boy Scout Pot #1 - Aluminum
Fuel: 91% isopropyl alcohol
Amount of fuel: 1/2 fluid ounce
Amount of water: 2 cup(s)
Water temp at start: 60°
Time to boil: 7 minute(s) 39 second(s)
Time to run-out: 9 minute(s) 30 second(s)
Water temp at run-out: NA
Note: Lots of soot
NA = Not Applicable / Not Available
beeman715 made a comment on my Little Soda Can Stove V3.1 - Yodo Mod Boil Test 1 video:
"I am curious to see how Isopropyl 90% would work in that stove. Given the space between the? wicks and the pot I don't think it would smut your pot."
So in this video I use 91% isopropyl alcohol in the Little Soda Can Stove V3.0 the Yodo mod in it. To "Yodo" mod the stove I ran 1/16 inch diameter round, braided fiberglass wick through the jet holes of the stove.
I bought the wick from Canteen Gear Shop at $.17 a foot which worked out to $9.00 for 50 feet. You can find the Canteen Gear Shop at the following address:
canteengearshop.webs.com
To see where I got the "Yodo" mod idea from check out the following video:
"Auto preheating side burner for alcohol stove"
youtube.com/watch?v=PQm_ATSsjHg
Thanks for watching my video,
Hiram
Lab0210
Title: Little Soda Can Stove V3.1 - Yodo Mod Boil Test 2
Room temp: 63°
Humidity: 58%
Weather condition: Sunny & Breezy
Burner: Little Soda Can Stove (LSCS) V3.1 - Fizz Ed 8.4 fluid ounce size can - Yodo mod stove #4
Stove/Pot stand: Little Soda Can Stove (LSCS) V3.1
Pot: Boy Scout Pot #1 - Aluminum
Fuel: 91% isopropyl alcohol
Amount of fuel: 1/2 fluid ounce
Amount of water: 2 cup(s)
Water temp at start: 60°
Time to boil: 7 minute(s) 39 second(s)
Time to run-out: 9 minute(s) 30 second(s)
Water temp at run-out: NA
Note: Lots of soot
NA = Not Applicable / Not Available










