Uploaded March 2026 | Updated November 2026, 3 hours ago
This video introduces how to mount external compute and sensors on the lite3 robot and reproduce a complex SLAM algorithm called FAST-LIVO2. The links mentioned in the video:
librealsense(including realsense viewer): github.com/realsenseai/librealsense
livox viewer: livoxtech.com/downloads
nomachine: nomachine.com
fast-livo2-deep-robotics: github.com/DeepRoboticsLab/fast-livo2-deep-robotics
We didn't use the third cable coming out of the lidar to enable hard synchronization and because of that, the SLAM algorithm was unable to continue. This is not a problem of the algorithm. We encourage you guys to perfect this project by adding synchronization.
This video introduces how to mount external compute and sensors on the lite3 robot and reproduce a complex SLAM algorithm called FAST-LIVO2. The links mentioned in the video:
librealsense(including realsense viewer): github.com/realsenseai/librealsense
livox viewer: livoxtech.com/downloads
nomachine: nomachine.com
fast-livo2-deep-robotics: github.com/DeepRoboticsLab/fast-livo2-deep-robotics
We didn't use the third cable coming out of the lidar to enable hard synchronization and because of that, the SLAM algorithm was unable to continue. This is not a problem of the algorithm. We encourage you guys to perfect this project by adding synchronization.










