Uploaded August 2025 | Updated September 2026, 1 week ago
youtube.com/watch?v=zEbwcFrsL6I
laptopscreen.com
laptopscreen.com/English/brand/LG
How to replace screen on LG Gram 16z90r laptop.
This is a guide on replacing a screen on LG Gram 16z90r laptop.
For the replacement process we will need a plastic pick and tweezers.
To begin turn off the laptop.
We are going to remove the LCD screen with bezel. Insert a plastic pick between the screen and the back cover.
Move it along the perimeter. Once the screen is unglued open the screen as a book at approximately 30 degrees
to the back cover.
Now we have access to the video connector. Peel off the clear tape securing the video cable, open the connector’s bracket disconnect the video cable. Place the screen on the desk.
Next we have to separate the bezel from the screen which is glued to the front of the LCD. Insert a plastic pick
between the bezel and the screen and move it along the perimeter. Use hands to unsnap tabs holding the
bezel. Separate the bezel and discard the old screen.
Place the new screen on the keyboard. Reconnect the video cable. Close the connector’s bracket and secure it
with clear tape.
CAUTION! It is very important not to force any connectors. Also
make sure not to twist or slant the connector when plugging it in.
Now we can test the screen. Lift the screen up and lean it against the back cover. Turn on the laptop.
The screen is working and we can finish reinstallation process.
Use alcohol and a piece of cloth to clean the surfaces on the sides of the screen and the back cover.
Place the screen on the keyboard. Apply new pair of adhesive strips. You can buy a set of adhesive strips on
our site: Laptopscreen.com. Lift the screen up and apply some pressure to catch the glue.
Use a tweezers to fold the loose tabs in the bottom of the screen. Remove the protective film. Reinstall the bezel.
Go around the perimeter snapping the tabs back in place.
Turn the laptop on and we are done!
youtube.com/watch?v=zEbwcFrsL6I
laptopscreen.com
laptopscreen.com/English/brand/LG
How to replace screen on LG Gram 16z90r laptop.
This is a guide on replacing a screen on LG Gram 16z90r laptop.
For the replacement process we will need a plastic pick and tweezers.
To begin turn off the laptop.
We are going to remove the LCD screen with bezel. Insert a plastic pick between the screen and the back cover.
Move it along the perimeter. Once the screen is unglued open the screen as a book at approximately 30 degrees
to the back cover.
Now we have access to the video connector. Peel off the clear tape securing the video cable, open the connector’s bracket disconnect the video cable. Place the screen on the desk.
Next we have to separate the bezel from the screen which is glued to the front of the LCD. Insert a plastic pick
between the bezel and the screen and move it along the perimeter. Use hands to unsnap tabs holding the
bezel. Separate the bezel and discard the old screen.
Place the new screen on the keyboard. Reconnect the video cable. Close the connector’s bracket and secure it
with clear tape.
CAUTION! It is very important not to force any connectors. Also
make sure not to twist or slant the connector when plugging it in.
Now we can test the screen. Lift the screen up and lean it against the back cover. Turn on the laptop.
The screen is working and we can finish reinstallation process.
Use alcohol and a piece of cloth to clean the surfaces on the sides of the screen and the back cover.
Place the screen on the keyboard. Apply new pair of adhesive strips. You can buy a set of adhesive strips on
our site: Laptopscreen.com. Lift the screen up and apply some pressure to catch the glue.
Use a tweezers to fold the loose tabs in the bottom of the screen. Remove the protective film. Reinstall the bezel.
Go around the perimeter snapping the tabs back in place.
Turn the laptop on and we are done!
