Uploaded September 2016 | Updated September 2026, 2 weeks ago
Washing some sports fabrics on the NFC downloaded "Tag On" Sportswear cycle. It defaults to a warm wash (35°C) and medium spin (600rpm). Turbo Wash is not available on this cycle.
Uses a gentler action to allow for soaking and the “swing” motion. This is one of the few cycles that does not sense the load at the start so doesn't adjust the time based on the load size.
For the North American machines, temperature and spin speed vary from cycle to cycle which is one reason and advantage temperature is only listed as: tap cold, cold, warm, hot and extra hot; and spin speeds: no spin, low, medium, high and extra high. They are not listed as locked to °C or rpm. On the Permanent Press cycle medium spin is 1,000rpm but this cycle it is only 600rpm. Same with warm wash … it varies between 30-40°C depending on the cycle selected.
For more info, behind the scenes footage, and a forum for friendly discussion visit and Like my Facebook page facebook.com/deanswashervideos
Video Index
0:34 Start cycle and main wash fill to 35°C
28:10 Drain & slow interim spin
31.53 Fill & rinse
37:38 Drain & slow interim spin
40.12 Fill & final rinse
46:19 Drain & final spin - 600rpmw
Noises you may hear that are not the washer
- Clicking and whooshing noises during main fill - this is the on demand gas water heater
- Dripping noises - the furnace a/c draining into the floor drain
- One off loud clicks - the freezer next to the washer turning off and on periodically
Washing some sports fabrics on the NFC downloaded "Tag On" Sportswear cycle. It defaults to a warm wash (35°C) and medium spin (600rpm). Turbo Wash is not available on this cycle.
Uses a gentler action to allow for soaking and the “swing” motion. This is one of the few cycles that does not sense the load at the start so doesn't adjust the time based on the load size.
For the North American machines, temperature and spin speed vary from cycle to cycle which is one reason and advantage temperature is only listed as: tap cold, cold, warm, hot and extra hot; and spin speeds: no spin, low, medium, high and extra high. They are not listed as locked to °C or rpm. On the Permanent Press cycle medium spin is 1,000rpm but this cycle it is only 600rpm. Same with warm wash … it varies between 30-40°C depending on the cycle selected.
For more info, behind the scenes footage, and a forum for friendly discussion visit and Like my Facebook page facebook.com/deanswashervideos
Video Index
0:34 Start cycle and main wash fill to 35°C
28:10 Drain & slow interim spin
31.53 Fill & rinse
37:38 Drain & slow interim spin
40.12 Fill & final rinse
46:19 Drain & final spin - 600rpmw
Noises you may hear that are not the washer
- Clicking and whooshing noises during main fill - this is the on demand gas water heater
- Dripping noises - the furnace a/c draining into the floor drain
- One off loud clicks - the freezer next to the washer turning off and on periodically
