Uploaded October 2025 | Updated November 2026, 7 hours ago
Dice goblins unite! Like most, uh, mature tabletop gamers I have far more dice than I really know what to do that, but my friend Salty Nick (Saltiest of Nicks and proprietor of @SaltyNicks ' Tavern) has been on a dice making bender for a while and he inspired me to go on a dice making journey of my own. I figure I may at least be able to replace a few specialty dice I lost over the years.
This is not going to be a short journey! This video is probably the easiest part for me, as modelling dice in Blender is fairly straightforward once you figure out a procedure. Next I'll need to get some 3d printed, and then it's off to silicone and resin casting. If you've been around a while and recall my past adventures with casting (youtu.be/zFSSjl3uBAQ) you might understand why I'm rather apprehensive about that part!
Blender can be downloaded for free from blender.org though if you can send a couple of bucks their way, it will encourage them to keep up the amazing work they're doing.
The add on I used in this video is "3D Print Toolbox", while the one I suggested is "Extra Mesh Objects". They're both free - in Blender 3.6 you can go to the Edit Menu, Preferences, Add-ons, and find and enable them in there.
Blender 4.5 no longer packages the add-ons by default, so instead of the Add-ons tab you will need to go to "Get Extensions" (also in the preferences, so it's not a big difference). You may need to enable network access from the system tab, but don't worry, blender will tell you if that is the case.
If you plan to use Blender to model for 3d printing, check out @ArtisansofVaul - his tutorials are massively educational! Neil's also a blast to hang around with - I interviewed him a while back! youtube.com/live/Oi0dvYGCefw
---------------------------------------------
You can find "The Four Horsemen", my 30 years war supplement for EZD6 in paperback or pdf format at DriveThru RPG: drivethrurpg.com/product/448949/The-Four-Horsemen?affiliate_id=523335
The Four Horsemen is not a complete game; you will need a copy of the EZD6 Core Rulebook which you can also find at DriveThru RPG:
drivethrurpg.com/product/397599/EZD6-Core-Rulebook?affiliate_id=523335
You can also pick up The Pool of The Nameless things, an EZD6 fantasy/horror scenario I wrote! drivethrurpg.com/product/440000/The-Pool-of-The-Nameless-Things?affiliate_id=523335
The DriveThruRPG links above are affiliate links, so if you buy something through them the channel gets some pennies at no cost to you.
---------------------------------------------
Enjoy this content? Join my Patreon at patreon.com/karlmakesstuff
Drop into my discord server at discord.gg/Pn5T8h8
Enquiries: karl.agius@gmail.com
---------------------------------------------
Chapters
00:00:00 - Introduction
00:00:16 - My cunning plan
00:00:30 - Blender
00:00:35 - Setting up the workspace
00:01:03 - Preparing the cube
00:01:25 - Adding Placeholders
00:01:52 - Setting up snapping
00:02:27 - Adjusting the orientation
00:03:04 - Creating numbers
00:04:27 - Positioning the numbers
00:04:58 - Converting the text to meshes
00:05:18 - Cutting the numbers into the cube
00:05:57 - Exporting to STL
00:06:14 - Adding Symbols instead of numbers
00:07:49 - Replacing a number
00:08:33 - The finished model and what comes next
Dice goblins unite! Like most, uh, mature tabletop gamers I have far more dice than I really know what to do that, but my friend Salty Nick (Saltiest of Nicks and proprietor of @SaltyNicks ' Tavern) has been on a dice making bender for a while and he inspired me to go on a dice making journey of my own. I figure I may at least be able to replace a few specialty dice I lost over the years.
This is not going to be a short journey! This video is probably the easiest part for me, as modelling dice in Blender is fairly straightforward once you figure out a procedure. Next I'll need to get some 3d printed, and then it's off to silicone and resin casting. If you've been around a while and recall my past adventures with casting (youtu.be/zFSSjl3uBAQ) you might understand why I'm rather apprehensive about that part!
Blender can be downloaded for free from blender.org though if you can send a couple of bucks their way, it will encourage them to keep up the amazing work they're doing.
The add on I used in this video is "3D Print Toolbox", while the one I suggested is "Extra Mesh Objects". They're both free - in Blender 3.6 you can go to the Edit Menu, Preferences, Add-ons, and find and enable them in there.
Blender 4.5 no longer packages the add-ons by default, so instead of the Add-ons tab you will need to go to "Get Extensions" (also in the preferences, so it's not a big difference). You may need to enable network access from the system tab, but don't worry, blender will tell you if that is the case.
If you plan to use Blender to model for 3d printing, check out @ArtisansofVaul - his tutorials are massively educational! Neil's also a blast to hang around with - I interviewed him a while back! youtube.com/live/Oi0dvYGCefw
---------------------------------------------
You can find "The Four Horsemen", my 30 years war supplement for EZD6 in paperback or pdf format at DriveThru RPG: drivethrurpg.com/product/448949/The-Four-Horsemen?affiliate_id=523335
The Four Horsemen is not a complete game; you will need a copy of the EZD6 Core Rulebook which you can also find at DriveThru RPG:
drivethrurpg.com/product/397599/EZD6-Core-Rulebook?affiliate_id=523335
You can also pick up The Pool of The Nameless things, an EZD6 fantasy/horror scenario I wrote! drivethrurpg.com/product/440000/The-Pool-of-The-Nameless-Things?affiliate_id=523335
The DriveThruRPG links above are affiliate links, so if you buy something through them the channel gets some pennies at no cost to you.
---------------------------------------------
Enjoy this content? Join my Patreon at patreon.com/karlmakesstuff
Drop into my discord server at discord.gg/Pn5T8h8
Enquiries: karl.agius@gmail.com
---------------------------------------------
Chapters
00:00:00 - Introduction
00:00:16 - My cunning plan
00:00:30 - Blender
00:00:35 - Setting up the workspace
00:01:03 - Preparing the cube
00:01:25 - Adding Placeholders
00:01:52 - Setting up snapping
00:02:27 - Adjusting the orientation
00:03:04 - Creating numbers
00:04:27 - Positioning the numbers
00:04:58 - Converting the text to meshes
00:05:18 - Cutting the numbers into the cube
00:05:57 - Exporting to STL
00:06:14 - Adding Symbols instead of numbers
00:07:49 - Replacing a number
00:08:33 - The finished model and what comes next










