Lesson 16: Detecting Obstacle Using Infrared Obstacle Avoidance Sensor using SunFounder Kit - RJT599 @robojax
Lesson 16: Detecting Obstacle Using Infrared Obstacle Avoidance Sensor using SunFounder Kit - RJT599  @robojax
Uploaded December 2022 | Updated November 2026, 2 hours ago
In this tutorial, we will learn how to use an Infrared Obstacle Avoidance Sensor to detect obstacles effectively. We'll demonstrate how to program actions in the code to respond when an obstacle is detected, using a buzzer as an example. Additionally, we will explore how to adjust the sensor's sensitivity to increase its detection range. This lesson includes detailed explanations of the wiring setup and complete code implementation.

Purchase this kit from SunFounder website robojax.com/L/?id=367

This lecture is part of Robojax Arduino Course based on SunFounder kit with lesson 1 starts here: bit.ly/sunfouder

The best thank you for me is to Subscribe 🔔 to my channel, like 👍 the video It is greatly appreciated. 🔔 😊.
I will reply to all Subscriber's 🔔 questions. So make sure to Subscribe.😊 .

**** Purchase this SunFounder Arduino Learning kit from Affiliated Stores ***
Amazon USA:amzn.to/3iAYIh7
Amazon Canada:amzn.to/3Fm76cV
Amazon Germany :amzn.to/3UtVOYG
Amazon UK: amzn.to/3VuRNV1
Amazon France: amzn.to/3iCKfko
Amazon Spain: amzn.to/3Vu7uvA
Amazon Italy: amzn.to/3EYGu0v
Amazon Japan: amzn.to/3h0nbf1
SunFounder website: robojax.com/L/?id=367
eBay: ebay.us/xYb1lT
AliExpress: https://s.click.aliexpress.com/e/_DlS0a0F

Download Arduino Code: docs.sunfounder.com/projects/3in1-kit/en/latest
📚⬇️ Download and resource page for this video robojax.com/RJT599

Use Chapters from timeline or click on the time
00:00 Introduction
1:19 Introduction to IR Obstacle Avoidance
3:32 Wiring explained
4:02 Arduino Code explained
5:52 Basic Obstacle Avoidance Demonstration
8:15 Adjusting the sensitivity of Infrared Obstacle Avoidance Sensor
9:44 Tacking Action when obstacle is detected
11:14 Wiring with buzzer
11:47 Action with buzzer demonstration
#SunFounder #robojaxSunFounder #robojax_Obstacle_Avoidance


Tutorial by Ahmad Shamshiri form Canada

If you found this tutorial helpful, please support me so I can continue creating contents like this. Here is PayPal link bit.ly/donate-robojax

Power Supply I use:
DC 30V 60A Power supply: https://s.click.aliexpress.com/e/_98Ah5c
DC 60V 30A Power supply: https://s.click.aliexpress.com/e/_APyPJ0


If you found this tutorial helpful, please support me so I can continue creating contents like this. (PayPal): 🔥paypal.me/robojaxTV
Follow me on Facebook fb.me/robojaxTV
Follow me on TikTok tiktok.com/@robojaxtv
Follow me on Twitter: twitter.com/robojaxTV
Follow me on Instagram: instagram.com/robojax

Get other projects code ⬇️
🔥robojax.com

**** AFFILIATE PROGRAM ****
We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
Lesson 16: Detecting Obstacle Using Infrared Obstacle Avoidance Sensor using SunFounder Kit - RJT599Lesson 7: Digital Read Push button, detecting magnetic field  SunFounder Kit - RJT590Lesson 6: Buzzer, Driver Wheel and mini Water Pump using  Arduino SunFounder Kit- RJT589Lesson 7 of 10: Line Tracking, Cliff Detection  Calibrate Greyscale Sensor Raspberry Pi Pico CarAC Bulb with ArduinoESP32 Tutorial 25 - Measuring Temperature using NTC & LCD | SunFounders ESP32 IoT Learning kitDeleted videoLesson 19: Measure Distance Using Ultrasonic Sensor with Arduino | SunFounder RobojaxESP32 Tutorial 18 - Detecting Tilt using ESP32 | SunFounders ESP32 IoT Learning kitPiCar-X Lesson 7 of 16: Obstacle Avoidance with Ultrasonic | Raspberry Pi  car by SunFounderRadioLink AT90 9 channel 2.GHz RC Transmitter: Assigning switches to different channelsDeleted video
Robojax |

Lesson 16: Detecting Obstacle Using Infrared Obstacle Avoidance Sensor using SunFounder Kit - RJT599

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER