Uploaded September 2022 | Updated November 2026, 3 hours ago
This video demonstrates the effectiveness of a Less Lethal Concepts invisible UV-reactive liquid stain developed primarily for temporarily marking perpetrators.
Although the video was originally recorded approximately six years ago, the principle remains relevant.
During the demonstration, I sit in a well-lit room and the invisible UV liquid is sprayed directly onto my face. Under normal lighting, the extent of the contamination is difficult to see.
The lights are then switched off and an ultraviolet light is used to examine the affected area. Under UV illumination, the stain becomes exceptionally bright. I glow like a Christmas tree.
That difference between normal and ultraviolet light is precisely what gives an invisible marking agent its value.
If perpetrators cannot easily see the stain on themselves, their clothing or their possessions, they may be less likely to recognise that they have been marked and immediately attempt to remove it. This can allow the UV-reactive material to remain detectable for longer and provide an opportunity for identification after the incident.
If a suspect is apprehended shortly afterwards, investigators can use a suitable UV light to examine exposed skin, clothing and possessions. The marking may help establish that the person was exposed in a particular protected area when considered together with:
• CCTV footage
• Alarm and activation records
• Witness statements
• Entry and exit information
• Other available evidence
The standard UV stain is an investigative marking aid. It is not, by itself, forensic proof that a person committed an offence.
Where stronger evidentiary traceability is required, uniquely coded or forensic marking technology may potentially be integrated, depending on the application, technical compatibility, client requirements and budget.
The UV stain can be used independently or incorporated into compatible Less Lethal Concepts formulations and deployment systems, including:
• Pepper-spray liquids
• Fixed internal or external spray systems
• Larger 2kg defensive systems
• Perimeter and access-point protection
• Asset-marking applications
• Specialist liquid or powder marking products
• Custom systems developed around a particular site
Effective marking distance depends on the delivery system, droplet volume, nozzle, wind and environmental conditions.
Small aerosol cans are generally more suitable for close-range application, typically within approximately two metres. At greater distances, sufficient marking coverage may require a higher-volume system, such as a suitable 2kg or larger installation with correctly configured nozzles.
The primary purpose is to mark perpetrators, although the formulation may also be used to mark protected assets or create a traceable link between property and an incident.
When combined with pepper spray, the system can serve two purposes: helping disrupt the offence while it is happening and temporarily marking the perpetrator for possible identification afterwards.
Any deployment requires assessment of the intended application, human exposure, surface staining, cleanup, equipment compatibility and applicable laws and operating procedures.
Less Lethal Concepts has more than 30 years of experience developing defensive, disruptive and marking solutions for homes, businesses, vehicles, industrial facilities and remote infrastructure.
Detection identifies the incident. Immediate response disrupts it. Invisible marking may help identify who was there.
If perpetrators cannot see the mark, they may not realise how much evidence they are carrying away with them.
Website: [www.lesslethalconcepts.co.za](http://www.lesslethalconcepts.co.za)
Email: [info@lesslethalconcepts.co.za](mailto:info@lesslethalconcepts.co.za)
This video demonstrates the effectiveness of a Less Lethal Concepts invisible UV-reactive liquid stain developed primarily for temporarily marking perpetrators.
Although the video was originally recorded approximately six years ago, the principle remains relevant.
During the demonstration, I sit in a well-lit room and the invisible UV liquid is sprayed directly onto my face. Under normal lighting, the extent of the contamination is difficult to see.
The lights are then switched off and an ultraviolet light is used to examine the affected area. Under UV illumination, the stain becomes exceptionally bright. I glow like a Christmas tree.
That difference between normal and ultraviolet light is precisely what gives an invisible marking agent its value.
If perpetrators cannot easily see the stain on themselves, their clothing or their possessions, they may be less likely to recognise that they have been marked and immediately attempt to remove it. This can allow the UV-reactive material to remain detectable for longer and provide an opportunity for identification after the incident.
If a suspect is apprehended shortly afterwards, investigators can use a suitable UV light to examine exposed skin, clothing and possessions. The marking may help establish that the person was exposed in a particular protected area when considered together with:
• CCTV footage
• Alarm and activation records
• Witness statements
• Entry and exit information
• Other available evidence
The standard UV stain is an investigative marking aid. It is not, by itself, forensic proof that a person committed an offence.
Where stronger evidentiary traceability is required, uniquely coded or forensic marking technology may potentially be integrated, depending on the application, technical compatibility, client requirements and budget.
The UV stain can be used independently or incorporated into compatible Less Lethal Concepts formulations and deployment systems, including:
• Pepper-spray liquids
• Fixed internal or external spray systems
• Larger 2kg defensive systems
• Perimeter and access-point protection
• Asset-marking applications
• Specialist liquid or powder marking products
• Custom systems developed around a particular site
Effective marking distance depends on the delivery system, droplet volume, nozzle, wind and environmental conditions.
Small aerosol cans are generally more suitable for close-range application, typically within approximately two metres. At greater distances, sufficient marking coverage may require a higher-volume system, such as a suitable 2kg or larger installation with correctly configured nozzles.
The primary purpose is to mark perpetrators, although the formulation may also be used to mark protected assets or create a traceable link between property and an incident.
When combined with pepper spray, the system can serve two purposes: helping disrupt the offence while it is happening and temporarily marking the perpetrator for possible identification afterwards.
Any deployment requires assessment of the intended application, human exposure, surface staining, cleanup, equipment compatibility and applicable laws and operating procedures.
Less Lethal Concepts has more than 30 years of experience developing defensive, disruptive and marking solutions for homes, businesses, vehicles, industrial facilities and remote infrastructure.
Detection identifies the incident. Immediate response disrupts it. Invisible marking may help identify who was there.
If perpetrators cannot see the mark, they may not realise how much evidence they are carrying away with them.
Website: [www.lesslethalconcepts.co.za](http://www.lesslethalconcepts.co.za)
Email: [info@lesslethalconcepts.co.za](mailto:info@lesslethalconcepts.co.za)










