Uploaded September 2021 | Updated September 2026, 2 hours ago
Leister UNIROOF AT roof welding machine 620° Review & Test
Shop from here: amzn.to/3AZ5PEc
amzn.to/3ikpg2T
Innovative roof welding machine
The new UNIROOF AT is a service-friendly roof welding machine for welding thermoplastic membranes on both flat roofs and slight inclines (up to 30°). Compared to the predecessor, UNIROOF E, the welding parameters can be adjusted intuitively on the display. The slim housing construction and movable transportation axle also eliminate time-consuming machine conversion for different applications. It can easily weld as close as 4” (100mm) to a wall, on top of parapets, on flat surfaces, or in any difficult-to-reach “problem areas on a roof”.
The UNIROOF AT makes it possible to weld all thermoplastic membranes as well as select hybrid EPDM membranes. With specifications of 3450 W, 230 V and a maximum of 15 A, the welding machine can be used anywhere: Thanks to the low 15 A maximum power consumption, users are more independent of the power supply quality, because no high voltage is necessary for the use of the device. The maintenance-free direct drive in the pressure roller is additionally characterized by service-friendly, higher contact pressure and significantly higher welding speed than all corresponding competitor products. The new UNIROOF AT outperforms comparable machinery by 66%. With the flexible accessory assortment for welding rib profiles, welding by hand is no longer necessary. The completely controlled closed-loop system for drive, temperature and blower volume ensures process and investment security for builders and companies alike.
The digital display showing both welding parameters (target/current values for running time) and incoming voltage ensure continuous monitoring. Save time thanks to programmable welding profiles for the most common roof membranes.
#leister #roofweldingmachine #uniroof #epdm
Leister UNIROOF AT roof welding machine 620° Review & Test
Shop from here: amzn.to/3AZ5PEc
amzn.to/3ikpg2T
Innovative roof welding machine
The new UNIROOF AT is a service-friendly roof welding machine for welding thermoplastic membranes on both flat roofs and slight inclines (up to 30°). Compared to the predecessor, UNIROOF E, the welding parameters can be adjusted intuitively on the display. The slim housing construction and movable transportation axle also eliminate time-consuming machine conversion for different applications. It can easily weld as close as 4” (100mm) to a wall, on top of parapets, on flat surfaces, or in any difficult-to-reach “problem areas on a roof”.
The UNIROOF AT makes it possible to weld all thermoplastic membranes as well as select hybrid EPDM membranes. With specifications of 3450 W, 230 V and a maximum of 15 A, the welding machine can be used anywhere: Thanks to the low 15 A maximum power consumption, users are more independent of the power supply quality, because no high voltage is necessary for the use of the device. The maintenance-free direct drive in the pressure roller is additionally characterized by service-friendly, higher contact pressure and significantly higher welding speed than all corresponding competitor products. The new UNIROOF AT outperforms comparable machinery by 66%. With the flexible accessory assortment for welding rib profiles, welding by hand is no longer necessary. The completely controlled closed-loop system for drive, temperature and blower volume ensures process and investment security for builders and companies alike.
The digital display showing both welding parameters (target/current values for running time) and incoming voltage ensure continuous monitoring. Save time thanks to programmable welding profiles for the most common roof membranes.
#leister #roofweldingmachine #uniroof #epdm
